Amazing paint with good coverage! Watery but in a good way! Did my floor and boards twice! Amazing finish! Brilliant coverage,two coats were more than enough on heavily marked wood. The small tin goes a long way!!!

Concrete and Garage Floor Paint | Rust-Oleum Concrete and Garage Floor Paint | Rust-Oleum

Small or large roller tray and foam or short-pile roller (depending on size of area you are painting) You don't have permission to access "http://www.homedepot.com/b/Paint-Interior-Paint-Interior-Floor-Paint/Rust-Oleum-Home/N-5yc1vZ2fkomllZrpk" on this server. Add the Activator (included) to the Rust-OleumFloor Tile Paintand stir thoroughly until the mixture is uniform. We recommend using a paint brush to ‘cut in’ around the edges of the room and paint in-between the tiles- this ensures that the paint reaches difficult areas, like grout, evenly. Use a roller to apply paint to the remainder for an effortlessly smooth finish. Apply two coats for flawless results. Cover new ground by adding a classic low sheen chalk finish to your flooring for a contemporary refresh.

Preparation: For best results, ensure surface is clean and free from wax or oil. If wax has been used clean the surface thoroughly with white spirit. We recommend that bare wood, previously painted or varnished surfaces should be sanded before painting. Ensure new concrete is sound, fully cured and free from laitance. Clean Up: Remove as much product as possible from application equipment before washing with water. Do not empty into drains or water courses. Some local authorities have special facilities for the disposal of waste coatings. Application: Apply when temperature is between 10 and 30ºC. Stir thoroughly prior to use. The product may be applied by brush or roller. If applying by brush, apply evenly following the grain of the wood. If rollering, use a short nap mohair roller. Two coats are recommended.

paint your floor tiles - rustoleumcolours How to paint your floor tiles - rustoleumcolours

Coverage: Up to 14m2 / litre. Coverage may vary depending upon method and rate of application and porosity of surface.