Sadolin Classic Wood Protection 2.5 litre - Natural

Product Information

Degrease any exposed bare timber surface by wiping with a lint-free cloth dampened with methylated spirits to remove any surface impurities or resinous deposits

Sadolin Classic soaks into the timber to provide a base coat, then Sadolin Extra provides a durable finishing coat. Avoid over spreading Sadolin Classic as this will reduce the long term durability and performance of the coating

Natural - one of many natural shades available in this size, that adds classic colour and protection to interior and exterior wood. This solvent-based wood stain is long lasting and durable, preventing peeling and flaking from the surface of the wood. We haven’t just added random products we’ve hand selected what we would recommend to use with Sadolin Classic All Purpose Woodstain including our most suitable tools for application and preparation. Always do a test area before starting any project to assess product suitability and final finish. Follow the manufacturer's instructions on the tin at all times. I used Sadolin Classic on a wooden patio door that had been neglected for several years. After thorough preparation ( sandpapering ) the wood I applied one coat of this Sadolin Classic and 48 hours later I applied a topcoat of Sadolin Extra. Patio door now looks very good.

Coverage: Up to 15m² per litre on smooth softwood and hardwood, up to 8m² per litre on sawn softwood. Lightly abrade, in the direction of the grain, ensuring not to break through the surface coating, and removing any remaining sanding dust after Hardwoods such as Teak, Ipe, Meranti and Balau must be thoroughly de-greased with methylated spirits prior to applying Sadolin Classic Wood Protection, as they contain a lot of natural oils Offering a truly versatile woodstain solution, Sadolin Classic All Purpose Woodstain can be used on a wide variety of wooden surfaces, both interior and exterior. That’s why it’s at the core of our range. Whether it’s used alone or alongside another product, it provides an exceptional finish, each and every time. We recommend always following the manufacturer's instructions found on the tin. Stir thoroughly, it is recommended that a small test area is applied before treating the entire surface to ensure compatibility.Where possible, the base coat should be applied to all surfaces of the wood prior to fixing in place Please note : Once colours have been tinted, they cannot be cancelled or returned as they have been mixed to your specific requirements. Fill any surface defects, imperfections, or open joints with an appropriate filler such as Sadolin Stainable Woodfiller. Extensive colour choice – 14 wood tones and 48 tinted colours - see the chart below for tinted colours. Colour Range: There are 13 standard colours in the Sadolin Classic range, which are ready mixed, all the other 50 colours are tinted on our in-house Crown mixing system.

For best results use a good quality, long-pile paint roller or soft bristle brush. Apply Sadolin Classic to the timber, redistributing the coating after 5-10 minutes in the direction of the grain. Allow a minimum of 16-24 hours drying time before recoating or applying Sadolin Extra as a topcoat. Sadolin Extra is a durable woodstain particularly suitable for doors and windows, where it’s flexible nature and water repellancy provide long lasting protection. coat of Classic and 2 coats of Extra offer 3 to 4 years protection from the harmful effects of weathering. Allow to dry for 16-24 hours before applying another coat or 2 coats of an appropriate top coat such as Sadolin Yacht Varnish or Sadolin Extra Woodstain. Do not apply if there is a risk of rain, or when air / substrate temperatures are below 8 °C or above 25 °C, or if the relative humidity is above 80% during application or drying periods. Protect from frost and rain until dry. Failure to meet these requirements may adversely affect the drying, visual quality and durability of the finish.A lightening in colour, reduction in sheen and a loss of water-repellency is an indication that maintenance is required. For general maintenance, lightly abrade in the direction of the wood grain and clean using warm water and a mild detergent, then rinse thoroughly with clean water. Once dry, a fresh coat of Sadolin Classic Wood Protection can be applied. Some products may be delivered straight to your door from one of our suppliers and these products will be labelled within the product description.