There are many types of adaptors on the market and knowing what is suitable for what purpose is important to get a safe and reliable result. A Rating Ideal for all Applications - 3A for up to 720W, 5A between 720W and 2100W, 10A between 2100W and 2400W, 13A between 2400W and 3120W Once all the wires have been connected, the face plate is then screwed on to the pattress box, fixing it in place.

Fitting an Electrical Shaver Socket | DIY Doctor

Using electrical equipment in bath or shower rooms has always needed great care to ensure safety due to the obvious risks of mixing water and electricity. I am moving from the Netherlands to Ireland and I bought many European to UK travel adaptors to fit my (European plug) appliances which I'm intending to take with me. They are shaver adaptors with a 1 Amp fuse. Now, after doing some more research, I came to realize that this plug as it is, will do for shavers and electric toothbrushes but not for other appliances. For those "other" appliances that I want to use in Ireland can I change that existing 1 Amp fuse with a 3 Amp fuse or a 5 Amp fuse or a 13 Amp fuse? I am aware and already realize that I cannot use these adaptors for my washing machine and I also do not intend to take my refrigerator with me but what about the rest? There are adaptor plugs available to safely convert these to the UK style plug without having to take the existing plug off.The cable was then secured in place using UPVC capping to not only hold it but also protect it from any damage that might from any potential future work. Zone 1 – the area directly above zone 0, limited vertically to 2.25m above the bottom of the bath or shower, also 1.2m horizontally from the centre of a shower outlet to the height of the outlet, or 2.25m whichever is the higher In this example here we are using an existing lighting circuit so a 1mm twin and earth cable is run out from the top of the ceiling rose, down through the ceiling and down a chase that was cut into the wall. Suitable for accepting the plugs fitted to electric shavers and standard 2-pin continental mains plugs"

Mixed Mini Shaver Plug FUSES 20MM X 5MM (2X1AMP SISI UK® Mixed Mini Shaver Plug FUSES 20MM X 5MM (2X1AMP

When securing wires ensure that the retaining screw that holds the wire in place is tightened fully and that it has plenty of bare wire to clamp down on to. Hard to see how that's true, as shaver plugs and standard 2-pin continental mains plugs have different spacing. Yes you can force them in but I'd not agree that makes it "suitable". No, I meant my own european shaver has a plug similar to the standard 2 pin thin plug which is in use with some non-earth products. By the way, do you have any comment on my message to Plugwash? Thanks! Once a suitable supply has been found the next task is to isolate the supply to the circuit you are using! If in any doubt, the power to the entire house is turned off. You can only use shavers & toothbrushes with that adaptor, nothing larger & nothing that requires an earth connection.

visitor adaptors (e.g. http://www.roamingfox.co.uk/UK-Visitor-Travel-Adapter-pr-16228.html ). Theese have a higher current rating than shaver adaptors and can be used with some earthed plug types. However THEY WILL NOT PROVIDE AN EARTH TO GERMAN/DUTCH/FRENCH plugs. Ideally look for a model with double wound isolating transformer, integral overload protection and shutters on the plug inlets to prevent any accidental splashing. Once this is done, a minor works certificate is then issued to prove the installation has been carried out correctly. Below is another example of the same plug I bought (I bought the same type at ASDA) and it has a plastic grounding with a 1 Amp fuse. In both cases, the cables are run down through the ceiling and down a chase cut into the wall to run to both locations

Masterplug 3-Pin Fused Shaver Adaptor - Screwfix

And that means that you should not replace the fuse or use it for anything which draws more than 1A. It seems indeed to be the right conclusion to cut and replace the Euro (schuko) earth plugs to British ones alltogether. If either of the above are ignored, if any issues occur and you cannot produce a certificate for the works then there is a good chance that your home insurance will be invalid, so it certainly isn’t worth the risk. However if you are installing in an upstairs then you may be able to locate a suitable supply in the loft. This is often the easiest route as everything should be much more accessible. Once in place the cable was then tested to ensure there were no breaks etc. This is a necessary step as once the cable is filled over it’s a nightmare to have to dig it all out if it’s damaged.Zone 2 – the area beyond zones 0 and 1, 0.6m horizontally and up to 2.25m vertically. Zone 2 also includes any recessed window with a sill next to the bath and also around the wash basin