FLOPLAST 110mm Soil Ring Seal 92.5 Degree Double Branch - Black

Product Information

While both types of pipe transport wastewater away from your home into the sewer, there are some crucial differences that you need to be aware of. Basically: Note: If your property uses a sewage treatment plant, septic tank, or cesspool instead of a connection to the mains drains, there must be AT LEAST one open vent in the system to prevent a dangerous build-up of gasses. Solving pressure build-up with an Air Admittance Valve Since its foundation in 1991, FloPlast has established itself as a manufacturer of high quality plastic building and plumbing systems for the construction industry, in particular domestic and commercial new build and refurbishment projects. Soil pipes also need to be larger in diameter than waste pipes on the account of having to handle more…solid materials. While having your sink drain into a soil pipe wouldn't really matter much (apart from using up an unnecessary amount of space under it), having your toilet drain into a waste pipe would be a recipe for a very unpleasant disaster in your home. A waste system, as previously mentioned, is made up of pipes and fittings designed to carry wastewater from sinks, showers, bathtubs, washing machines, and dishwashers out to the sewer. Because these pipes shouldn't have to carry any solid waste away (stop scraping leftover food down the kitchen sink!), they don't need to be as large a diameter as the soil system pipes, meaning that less space is required to install them. The most common waste pipe sizes in the UK are 32mm (suitable for low volume outlets, such as small hand basins), 40mm (suitable for most kitchen sinks, showers, and baths), and 50mm (suitable for more commercial applications, or for connecting multiple waste pipes into a single flow.

soil pipe and waste pipe systems | JDP A basic guide to soil pipe and waste pipe systems | JDP

Bodily waste produces methane and other unpleasant/dangerous gasses that must be vented out of the system before reaching the sewer. For this reason, soil pipe systems are typically designed to be vented through the roof of your home to allow the gasses to escape out into the air. The wastewater produced by washing your hands, having a shower, washing your clothes, or doing the dishes doesn't produce these gasses however, therefore waste pipe systems don't require this ventilation.FloPlast's Soil& Waste Systems may be used to carry liquids, when subjected to a continuous flow, with a maximum temperature of 76 degrees C. Intermittent discharges of up to 100 degrees C may occur, provided that a duration of less than two minutes is observed. Vent Terminal - fits over the exposed end of the soil vent pipe to prevent large debris, birds, and other small wildlife from entering the system. A typical plastic waste system (be it Polypropylene Push-Fit or ABS Solvent Weld) will be comprised of 32/40mm pipes and fittings connected to either: This vent allows air to be drawn in from outside the property to rebalance the pressure in the system rather than from internal sources, thus avoiding the siphoning effect. As previously mentioned, a vent pipes other function is to allow soil system gasses to safely escape out into the atmosphere. For this reason, a vent must, according to building regulations, always terminate above the roofline of the property and be at least 900mm higher than any window or opening that is within 3 meters of the pipe.

Fit 92.5° Double Socket Branch Black 110mm FloPlast Push-Fit 92.5° Double Socket Branch Black 110mm

Weathering Collar - used to divert rainwater away from falling directly onto the weathering slate to provide extra protection. Dealing with plastic systems is a lot more straightforward, as most plastic drainage pipes are designed to be compatible with each other regardless of the manufacturer. If they aren't, conversion fittings are usually readily available to make connections as easy as possible. The only caveat to this is that different connection types shouldn't generally be mixed. For soil pipes, the two main connection types are either Ring Seal or Solvent Weld, meaning that if the system you are connecting to is a Solvent Weld system, you should ideally be using Solvent Weld pipes and fittings rather than Ring Seal, and visa-versa. "But what is the difference between these two connection types?" we hear you ask. Well, fortunately enough, we have written a separate article (Ring Seal or Solvent Weld - which soil pipe system is better?) to answer just that. Unless you are a qualified plumber or work in the drainage industry, it is likely that you've never needed to know the difference between the two, as both basically just remove the waste from your home and carry it to the sewer, which is all most of us are concerned about. As long as it works, why should we worry? Hopefully, for most of us, the answer is that we shouldn't need to worry at all. We should be able to run our taps, fill our baths, and flush our toilets in blissful ignorance of the dirty work these unsung heroes of the household system have to do. The problem, however, comes when something goes wrong. Compatible with most other existing materials and systems manufactured to British/European Standards. But why is it important to make this differentiation? Why can't one pipe service all wastewater needs if they both carry it out to the sewer? Why does it matter whether you use soil pipes or waste pipes? The answer lies in what they are used for and the way they are vented.Lightweight Access Branch manufactured from uPVC for strength and durability. Easy to work with and suitable for high temperature waste discharges. Access branch enables testing and maintenance of the soil system. The use of silicone lubricant on all seals will facilitate jointing. For use with 32 and 40mm boss adaptors. Conversion Bends - used to create changes in direction while also converting the connection type between push-fit and solvent weld. Note: the vast majority of properties in the UK still use potable water to refill toilet cisterns after flushing. Therefore, to avoid wasting that precious water, multi-flushing should be reserved for only those times when paper rationing isn’t...practical, shall we say. Alternatively, why not look into getting ahead of the curve and invest in a rainwater harvesting system? You could save money and help the environment by using stored rainwater to fill your toilets and supply your household appliances. Have read of our “What is rainwater harvesting and why is it important?" article to find out more. Traditionally, most waste pipes used to be made from either copper, iron, or lead, and many properties may still have systems that are at least partially comprised of these materials. Copper is actually still quite popular today, among some professionals, as the pipes can be made to fit into tighter spaces, are more flexible at the joints (therefore offer good resistance to vibration damage), and have a certain premium aesthetic appeal. The more modern alternative to copper waste pipes, however, is plastic. Each have their own pro's and con's, but the popularity of plastic pipes has grown exponentially due to the fact that they are much less expensive than copper pipes, easier to install, more resistant to corrosion and impact damage, and quieter at high pressure and water speeds. They offer an extensive choice of systems and products, in a range of sizes and colours, to suit all tastes and applications. Their Soil & Waste Systems offer a comprehensive, integrated and modern range of products for all soil and waste applications.