Tamiya Panel Line Accent Colour Paint

Product Information

To remove it, simply take the piece of paper towel used to dry your cotton swab and wipe the area down. And there you have the basics, shake, drop, dry and clean. Rudder and cleaned up panel lines Once these clear coats have fully dried in an hour or so the Tamiya Panel Line Accent Color can be safely added. It’s critical to let them dry or you risk rubbing the Tamiya pigment into the unhardened clear coat. Wing half with 3 sheens Next, I’ve sprayed the part with AK Interactive Real Colors Air Superiority Blue, masked and sprayed semi gloss then gloss clear coat. Painted and varnished shot at a 45 angle

Keep collections to yourself or inspire other shoppers! Keep in mind that anyone can view public collections - they may also appear in recommendations and other places. As you can see in the picture there’s quite a difference between the two color tones. The lighter looks as though rain had collected then dried while the softer brown has that earthy look. The point is you can have multiple shades and not be restricted to one. Tail with two cups Plastic parts may become brittle. Avoid using on movable parts and take care when applying to load-bearing areas.Now let’s get a little more organic. One of the great features about these products is blending it for a more idea shade. Sometimes light grey is too bold. In this picture you can see I’ve cut the ratio 50/50 in a mixing cup. This will give that spot a look of being hit by the muddy wind of propeller air-wash. Brown and grey in cup

H.G. Barnes is a former voice-over artist and retired sales and marketing professional. He’s the author of two large volume science fiction adventure romance novels with many more in the works. For well over 40 years he’s been building scale model replicas and now does commission work for clients in Canada and the USA, plus completes projects for companies in Asia and Europe. Let’s begin with the basics. Here’s the rudder of a 1/48 B-17 Flying Fortress. Some of the models Sunward Hobbies sell have coloured plastic parts, so if you simply want to add some depth and detail to your model here’s what to do. Here’s an added tip, if you’re doing the entire model, or a good portion of it, I suggest using an eye dropper or pipette and put 5 or 6 drops in a small cup. Using either the cap brush or your own you can mix it more conveniently instead of shaking the bottle every time it’s needed.Use the same method for removing the excess as explained above, yet for raised bolts and rivets a fine brush will allow you to get in between those without removing the needed accent color. Cup on part with brush Apply over base coat of lacquer or acrylic paint. Accent Color paints may damage underlying base coat. Test before applying onto the model. With the wing part in full view, you can clearly see that uncoated wing tip area refused to give up all the pigment, leaving a brown hue. Notice the difference below on the clean aileron? Once again, it all boils down to which look you want. Be cautious, rubbing too much on bare paint will remove some of it. full blue wing part This color was added to Panel Line Accent Color Series; it is ideal for highlighting panel lines and other details to give your model a more realistic depth. ★Dark Brown color is useful for applying weathering effects on tank models. ★1 bottle contains 40cc enamel paint. The bottle's cap features a brush for easy application.