TISINO 6.35mm TRS Stereo Jack to XLR Male Balanced Signal Interconnect Cable Patch Cord Lead - 2m

Product Information

The SC9 is a TRRS to TRRS cable designed to connect a wide range of audio devices. At 1.5 metres long, it is particularly suitable for connecting a smartphone to the RØDECaster Pro. SC10 – 3.5mm TRRS to TRRS Cable Do you have a project involving sound design and recording as integral parts? If yes, one of the critical things you would have to regard would be the cable type to set up your studio.

As already mentioned, the XLR cable is the top choice for microphones, past and present. And it’s difficult to go wrong when you choose something that’s been the choice of many for years and years. The SC7 is a TRS to TRRS patch cable, designed to allow microphones with a 3.5mm TRS output, such a RØDE VideoMic or Wireless GO, to connect to devices with a TRRS input like a computer or mobile device. SC8 – 3.5mm TRS to TRS cable (6m) Inflexibility. The equipment you are using must be compatible with XLR cable, which means the equipment must be a female port and the connector must be a male port. There are three common TRS connector types: stereo, mono, and balanced. So what does each stand for? The RØDE SC17 USB-C to USB-C cableconnectingthe RØDECaster Pro to aMacBook Pro. Understanding Different Cable ConnectionsThe SC2 is a 3.5mm TRS to TRS patch cable used for connecting microphones or wireless receivers to cameras. The coiled cable means that the SC2 can easily extend from 170mm to up to 400mm. Assuming that the same type of cable is used with either configuration, there will be no sound quality difference. The SC21 is a 300mm USB-C to Lightning cable which is included with the AI-Micro. Similar to the SC15, it is MFi-certified, making it suitable for connecting RØDE microphones and devices with a USB-C output to iPhones or iPads with a Lightning input. SC22 – USB-C to USB-C Cable (300mm)

XLR outputs are used for microphones intended to be plugged into professional audio equipment like mixers and audio interfaces, such as our studio and shotgun microphone range. Balance. XLR cable is always, always balanced, which means there is less likelihood of noise and interference. This also makes the audio quality superb.

XLR can filter out noise for a more clean sound. It is also highly compatible with microphones. These make XLR cable an ideal choice for studio recording. Meanwhile, unbalanced cables are less complicated but also more prone to noise. Because they’re unbalanced, you should keep their connections as short as possible for under 25 feet because the longer the run of the cable the more likely attenuation and noise will happen. Shorter cables reduce risk for noise potential from the signal to the device. What Is XLR? Versatility. TRS cable is a standard choice for musical instruments such as guitars, keyboards, and synthesizers. While keyboard workstations are now supporting XLR connectors, there are still lots of instruments that only support TRS connectors. The SC4 is a TRS to TRRS adaptor, designed to allow microphones with a 3.5mm TRS output to connect to deviceswith a TRRS input. This is ideal if you want to connect a RØDE VideoMic, lavalier or Wireless GO to a computer, smartphone or tablet. SC5 – 3.5mm TRS to TRS Cable for Wireless GO II (Not Available Separately) The SC18 is a USB-C to USB-A cable. At1.5-metres long, it’s ideal for connecting USB-C devices such as the NT-USB Mini or RØDECaster Pro to devices with a USB-A input. SC19 – Lightning Accessory Cable (USB-C to Lightning)

Essentially, the audio inputs and outputs must flawlessly work together to achieve professional and studio-quality audio work. But which one between XLR and TSR is a good choice? Perhaps it would be easier to make your choice if you understand the characteristics of these two audio cables. Read on to learn more. XLR vs. TRS: Beginner’s Guide to Audio Cables TRS – Tip, Ring, and SleeveThe SC16 is a 300mm-long USB-C to USB-C cable designed to connect RØDE microphones with a USB-C output to USB-C compatible devices. SC17 – USB-C to USB-C Cable (1.5m) The SC22 is a 300mm USB-C to USB-C cable which is included with the AI-Micro. Similar to the SC16, it is suitable for connecting RØDE microphones and devices with a USB-C output to USB-C compatible devices such as smartphones or tablets. VC1 – 3.5mm TRS Extension Cable (3m) I recently bought a FocusRite Scarlett 2i2 audio interface. There are two XLR channels used for input. XLR Connectors Less Likely to Short Out: XLR connectors don’t short out during connection. TRS can short out and you risk blowing out your fancy ribbon microphone with a preamp when you have phantom power turned on while TRS is plugged in. XLR can be safer to use in such a scenario, especially if you leave phantom on (which isn’t advised anyway, but it’s something you should consider).