Drill Bits for Plastic (Acrylic, plexiglass, ABS, lexan, Polycarbonate, PVC) Norseman 7pc Acrylic Point Drill Set in Vinyl Pouch. Includes 1/8", 5/32", 3/16", 7/32" 1/4", 5/16", and 3/8" Part BG4650A

Product Information

Always a trusted name in the power equipment, this CRL drill bit is made with quality in mind. Simply put, it is manufactured from high-quality steel to provide better longevity and protection from wear. ACRYLITE® sheet must be adequately supported and clamped to prevent flexing or vibration during the cutting operation. The material should also be placed as close to the fly cutter as possible to reduce the distance the cutter has to travel. So, to ensure you invest in the best drill bits, below are some of the features you might need to consider. Drill Bit Material

How to drill holes into acrylic - Cut My

Most red wall plugs are 6mm in diameter, so to drill a hole for a red plug, you will need a 6mm drill bit. Hex shank - A hexagonal-shaped shank used in screw guns or electric screwdrivers with a hammer mode. The best part? For maximum durability, the drill bits are constructed from C-3 Tungsten Carbide which is the hardest and most versatile material. The fly cutter and cutting tool itself must be secured properly. Cutting tool must only be extended enough to achieve the desired depth of cut. Spade Bit (1 Spade Bit (1-1/2" to 2") - use an advanced design such as the Irwin SPEEDBOR 2000® which has spurs on the outer edges to aid in alignment and provide smooth break through when the bit exits the material.A HSS drill bit is made from high-speed steel, as described in the materials section above. It’s often used in multi-purpose drill bits as it can be used on wood, plastic and metal. HSS drill bits are also the best drill bits for soft metals. Never force your cut, this will cause the acrylic to over heat and possibly melt or disfigure the cut edge. The Acrylic will always come with a protective film or sheeting attached, leave this protective layer on the acrylic as long as you can, it will protect the finished surface of your acrylic.

Drill bits suitable for drilling into plastic

This might come as a surprise to you, but plastics are, in fact, drillable. However, one needs to adhere to a strict set of protocols when attempting to drill a hole through plastic materials. When using a jigsaw to cut Acrylic make sure the cutting speed is as high as you can achieve with your saw. If you are producing straight line cuts the use of a straight edge clamped into position will ease the cutting process and give you a correct cut. The Jig Saw is the most suitable tool to also give you curved cuts in Acrylic. Hand saws can be used but because of the speed of the cutting action, a Jig Saw will give a smoother more constant finish. A light misting of water is also recommended to keep the cutter and plastic cool, and also to act as a cutting lubricant. Air or liquid coolants should be used whenever possible. Coolants reduce generated heat, and therefore improve hole quality. In certain hole depths and sizes, coolants are necessary to prevent melting. As a general rule, coolants should be used when the depth of the hole (H) exceeds bit diameter (D) (e.g. for D=0.250", a coolant should be used for H>0.250"). Coolants should also be used for holes greater than or equal to 1/2" in diameter (D ≥1/2").

🍪 About Cookies on our Site

Ventilation is vital when using all these glues. Ideally an extractor should be used to extract all the dangerous fumes.

Plexiglass Drill Bits Reviewed - DrillingAdvisor Best Plexiglass Drill Bits Reviewed - DrillingAdvisor

Also worth mentioning is that the tool features a special sharp taper point. This provides easier and fast penetration. One of the primary benefits of acrylic (Perspex) plastic is how versatile the material is. You can use acrylic in a wide range of home and garden DIY projects at a relatively low cost. The plastic itself is easy to work with, cut, drill, and join, making it the perfect material for both amateurs and professional builders.This feature varies from one drill bit to another. Some tools have a 60-degree point angle while others have 90-degrees. Be sure to follow the manufacturer’s safety recommendations for equipment and materials used with ACRYLITE® sheet.