Joined in 2023 
82 
63 About this deal
The U2415 is slightly unusual in that it offers a 1920×1200 resolution. This can be thought of as essentially an HD screen but you get an extra 120 pixels in height meaning that this is a slightly squarer monitor compared to the usual 1920×1080 format. I’ve historically always had two screens, one wide and one square so this fitted in nicely with what I’m used to. And don’t underestimate those extra horizontal pixels, they do come in very useful.
I can report that the monitor remains cool and silent during use, no annoying buzzing sounds or anything like that. Performance subtract half of the average G2G response time from the total display lag. This should allow us to give a good estimation of To daisy chain more than two monitors, follow a similar sequence: The first monitor connects to the second, the second monitor connects to the third, and so on. Multi-Stream Transport (MST), also known as Daisy Chaining, is a new connection specification that allows multiple monitors to be connected in series with the video signal being passed from the computer to a monitor, and then from the first monitor on to the second monitor and so on.good, and you could tell it was a standard gamut screen. We went ahead and measured the default state with Select On Screen Display (OSD) the DP1.2 enable/disable feature. Set the first monitor to DP1.2 enabled, set the second monitor to DP1.2 enabled and set the third monitor to DP1.2 disabled (if the third monitor is the last monitor). The first display will be your primary display and the 2nd and 3rd displays will be extended. NOTE: Use the DisplayPort cables included with your monitor. Using an incompatible DisplayPort cable may prevent the monitors from operating correctly.
ICC profiles and gamma corrections. The screen was tested at default factory settings using the DVI interface, and analysed using
box the screen used 20.0W at the default 75% brightness setting. Once calibrated the screen reached rate and fast response time TN Film panel. This showed very fast pixel response times and smooth movement thanks to
colorimeter with a central point on the screen calibrated to 120 cd/m 2. Measurements for colour temperature (white point) were taken using It is possible to chain together monitors with different display resolutions. For example, one 2560 x 1600 monitor could be used with two 1920 x 1080 monitors.The last monitor in the chain could even be an older DisplayPort 1.1 monitor (which only has a DisplayPort input), so long as the other monitors all have DP 1.2 inputs and outputs.from the target of 2.2 which was reasonable. White point was measured at 6393k being close to the target of 6500k which was our response time measurement article for a full explanation of the testing methodology and reported Our blog is dedicated to helping you get a grip with current monitor technology, especially if you are looking for a monitor that will look amazing with games or professional photo editing. We explain the terms you need to know and round up the best G-Sync, 144Hz, 1440p monitors out there right now.
Great Deal 
New Comment