Kanto YU4MB Powered Speakers with Bluetooth and Built-in Phono Preamp | Auto Standby and Startup | Remote Included | 140W Peak Power | Pair | Matte Black

Product Information

Take note of the following behavior and functionality during Bluetooth operation. When you are successfully connected, the Blue LED will be lit solid, and your device will show as connected to 'YU4 by Kanto'. The YU4 powered speaker system is designed for either bookshelf or stand mounting. The stands should be of rigid construction, between 26" to 32" high. We recommend the Kanto SP26 speaker stands to go with your YU4. Push the knob to select an input source - it cycles through the following inputs depending on what input source was last used. The YU4 is designed to provide the best quality sound with its enhanced drivers and dome tweeters. The cabinets are handcrafted to make sure you get the best results each time. It connects to almost all audio equipment including a vinyl record player and it can also connect wirelessly via Bluetooth to any smartphone, tablet, or PC.

Verify that the volume of the speaker is not at its minimum level. Turn the volume up using the knob on the front or the volume controls on the remote.

🍪 Privacy & Transparency

Home AV Direct is one of the UK’s leading specialist for Home & Personal entertainment. Visit our amazing showroom in Hayes, West London to view, touch and listen to our Hifi and Surround sound display’s. Set the volume of the source to its highest level. Low source volume can negatively affect dynamic range.

We’re all sound fanatics. Most of us have been hungry to listen to new music and learn about new equipment since we were kids…… Related Posts Ensure that the balance setting on the speakers is centered by using the balance reset button on the remote.

Controls are limited and may take time to learn. We recommend using the remote control instead of the knob. Adjacent to it is an LED light that tells you that the speakers are powered on. Design – 4.8 out of 5 If using the optical input, set the source's output to stereo — not surround, Dolby, DTS, or 5.1 — and set the sample rate to 96Khz or lower. If your turntable does not have a built in Phono Pre-Amp, use the "Phono" setting on the Phono switch. Qualcomm aptX is a product of Qualcomm Technologies International, Ltd. Qualcomm is a trademark of Qualcomm Incorporated, registered in the United States and other countries, used with permission. aptX is a trademark of Qualcomm Technologies International, Ltd., registered in the United States and other countries, used with permission.