Here is the link to the breakdown they did on the MARS Hyrdro TS1000 - https://www.cocoforcannabis.com/grow-light-guide/mars-hydro-ts-1000-field-test-review/ Most manufacturers provide light intensity measurements at a few relevant heights above plants. If you can’t find these manufacturer provided light intensity measurements, you can buy a lux or PAR meter and measure it yourself. A suitable grow light is a crucial component of the kit. Mars Hydro TS600 LED grow light onsumes only 100watt, can replace 150watt HPS/HID with high Par/Lumen.

Let’s look at the device’s total light spectrum. It encompasses the whole PAR (Photosynthetically Active Radiation). That range stretches from 400 to 700 nm.HUOM! Tässä mallissa ei ole himmennintä eikä mahdollisuutta ketjutukseen. Katso seuraava malli, jossa se on: TS1000 Toimituspaketti TS3000, as the biggest led grow light in the TS series, offers enough coverage for a 4x4 ft area with affordable price and quality yields, in return it's able to be applied to both home cultivation and commercial veg cultivation, especially for hydroponic grow systems.

Remember, higher light intensity = higher yields. To read more about PPFD and light intensity levels required to grow cannabis, read my full article on the topic here. Effective Light Emission: The Full Spectrum LED Grow Light TS600 is 100 watts of power with an efficacy of 2.0 umol/j. It provides plants with high quality PAR to promote plant growth from seed to harvest. The inverse square law is a physics law that can help you to determine how intense your grow light is at a specified distance from your plants, which will help you determine whether you need to hang the grow light closer or further away from your plants. Focusing on personal indoor growing and small-scale cultivation, Mars Hydro TS LED grow lights are highly cost-efficient – TS Series provides sufficient lighting energy for indoor plants and achieve bountiful grow results from year-round production.Determining the proper distance above plants to hang LED grow lights is a bit more complicated – many have different wattage, and some even have intensifying lenses on top of the LEDs.

If your grow light is within the above mentioned range, there’s a good chance it’s hanging at the right level. But there are two more questions to answer to determine what height to hang your grow light. Is your grow light dimmable? LED grow lights provide an efficient and long-lasting lighting solution for indoor gardening. They offer the flexibility full spectrum to your plants’ specific needs, resulting in healthier growth, increased yields, and more successful indoor gardens. You would then double your hang height from 18 to 36 inches, and the light intensity would be decreased to 25% (250 micromoles) of 1000 micromoles, based on the law of inverse squares. Marvelous Luminescence –The luminescence of TS is similar to HID’s, to meet the needs of growers with HID lights perfectly. Meanwhile TS has high luminous efficiency.HPS/HID 250W best replacement, while consuming 150 watts of actual power. Yes, as the plant gets closer to the light it receives more intense light and you risk burning the plant unless you adjust your grow light height.

Lisätiedot

Absolutely brilliant bit of kit, plants are loving it !! big up mars hydro keep up with the good work ? Will be in touch for a upgrade in the near future ✌️? Plants loved full Spectrum: Different plant species have different light requirements during different stages of growth, and LED lights provide full spectrum to match those needs. This flexibility promotes healthier and more productive plants. This light doesn’t use any cooling fans to dissipate heat. It only depends on its aluminum heat sink to do so.

Lampade coltivazione indoor; Led coltivazione; Lampade per piante; Lampade per coltivazione indoor autofiorenti; Lampade per coltivazione indoor Provide fresh; high quality water. With nutrients appropriate to the plant AND growing medium. Soil is managed different than every other growing medium. The inverse square law of light applies to grow lights in that when a plant’s distance from a grow light doubles, the area covered in light increases, but the intensity of the light decreases to 25% intensity of the original distance. The grow light distance for veg stage and autoflowers is the same, because they both grow in 18 hours of light per day. Compact Design: LED grow lights are available in various compact and lightweight designs, making them suitable for smaller indoor spaces. They can be easily mounted or hung, allowing you to maximize vertical growing space and optimize light distribution to your plants.

Kuvaus

The way to properly determine what distance an LED grow light should be from a plant is to determine the light strength at a certain hanging height, and compare that light strength to the light strength required by cannabis plants. The light itself, Mars TS 600 might feel more hot than the Mars 300 since there is no fan and no light case, but that is normal, if you open the light case of the Mars 300, it will be hot as well. The heat is under control, won't influence the lighting works. You only need to know one intensity reading at one distance to determine another intensity reading at another distance. Genetics can play a role in plant stretching as well, but if you notice this happening, you should hang the grow light closer to the plants. Remember every 12 inches closer to the grow light increases intensity 75%. The target PPFD (light intensity measured at the leaves) for autoflowers and vegetative growth is 460 to 920 micromoles, assuming an 12 hour light period. It can be even higher than that, around 1200-1400 micromoles, if you plan on using CO2.