Hostaphan ® RN is a transparent, biaxially oriented film made of polyethylene terephthalate (PET) and characterised by outstanding physical properties. Let's take a look at how the whole process works. The first steps involve the extrusion of polyethylene terephthalate on a cold-rolled drum to produce the base film. This material is then machine stretched and then adjusted in the cross direction. The film for Mylar A is then fed over the rollers at exponentially increased speed to direct it into a burning flame where it is squared.

Mylar® A films are tough, general purpose films that are transparent in 48 through 92 gauge and translucent in heavier gauges. They have a rough surface to provide ease of handling, good adhesion, and processability. They are used for a broad range of industrial applications.First and foremost, the environmental conditions must be taken into account. Often Mylar A is coated or similarly treated on one or both sides to enhance its various properties. This can either be an improvement in the adhesive properties or the conductivity. This treatment offers various properties that cannot be achieved with the usual pre-treatment methods. However, most people are unaware of the costs that come with this convenience. Molten polyethylene terephthalate (PET) is extruded as a thin film onto a chilled surface, such as a roller. emergency blankets – The most important application of Mylar A is in rescue blankets due to its insulating properties. It is a commonly used body temperature stabilization material in areas where no other measures are available. The material is also used in outdoor survival kits, where the requirements are usually higher than usual.

Mylar® HS is an uncoated, transparent polyester film designed for heat shrink applications. It is commercially available in nominal 48, 65, 80 and 150 gauges. Good holding power, chemical resistance, high-temperature resistance Excellent for decorative striping Hostaphan ® polyester film products provide unique performance characteristics, suitable for use in the electrical and electronic market. As an extremely popular PET film brand, Mylar A is a material that we can easily recognize in our daily life. From food storage bags to other storage supplies, the material has made a name for itself. Heavy Duty Sail Repair Tape: This is an adhesive polyamide fabric sail repair tape. It is resistant to seawater and to various weather conditions.Mylar Repair Tape: This is a transparent, high clarity UV and saltwater resistant tape for repairs to sail windows and mylar sails. Dacron Sail Repair Patch: These are available in different colors. They contain two sailcloth patches for application to either side of the sail for a larger repair. Send me your offers and news. I understand Silmid will use my personal data to improve services and send me marketing communication Melinex ® 339 is an exceptionally white, opaque film pre treated on both sides to promote adhesion to most printing inks and industrial coatings. Main Tales: Like tell-tales that fit genoa luffs these tapes should be fitted at intervals along the leech of the mainsail. In this way, you’ll be able to trim the mainsail when sailing upwind or on a reach.