When buying partner items like this one, your contract of sale will be with our Range Plus Partner instead of us.

Balau: 12 weeks exposure. 006 Bangkirai is optically suitable and a very popular choice of colour tone. Occasional Maintenance: If necessary, intensive cleaning and refreshing using Osmo Wood Reviver Power Gel or Osmo Gard Clean ( for green growth).

Pigmented or Colour Decking Oils

If possible, and if the wood is absorbent please apply the first coat to all sides before installation. Contains Fatty acids, C6-19-branched, cobalt(2+) salts, 1,2-benzisothiazol-3(2H)one and reaction mass of 5-chloro-2-methyl-2H-isothiazol-3-one and 2-methyl-2Hisothiazol-3-one (3:1). May produce an allergic reaction. P101 If medical advice is needed, have product container or label at hand.P102 Keep out of reach of children.P103 Read carefully and follow all instructions. For the best protection, apply an exterior wood preservative to protect against mould, algae, dry rot, woodworm and wood related diseases

Start in the furthest corner, brushing along the length of the boards. Work on 3-4 boards at a time so you don’t get any overlap marks. Due to their surface properties, ribbed or grooved as well as rough (sawn) wood surfaces absorb more product per square metre than smooth surfaces.After the weathering period, it is generally recommended to clean the surface from the extractive content. Osmo Wood Reviver Power-Gel can be used to refresh the colour of the wood. If necessary and before application, de-grease the dried surface with Osmo Brush Cleaner and Thinner (degreaser), always trial apply! If it doesn't bead, you'll be ready to put on the oil. If it does then you'll have to clean it again until the water stops beading. Some products may be delivered straight to your door from one of our suppliers and these products will be labelled within the product description. Coverage 1 coat up to 8sqmetres/litre of smooth timber and up to 5sqmetresonrough sawn timber, 2 coats recommended.

The final colour finish can vary considerably due to the age, type & condition of the timber being treated. We always recommend carrying out a test area first in an inconspicuous area to make sure you are happy with the final dried colour. The finished surface is influenced by several factors, including the condition of the wood. Therefore, a trial application is always required, especially for unfamiliar surfaces. Coverage: 1 coat up to 8 sq metres/litre of smooth timber and up to 5 sq metres on rough sawn timber, 2 coats recommended. Ensure wood to be treated is dry, free from dirt and repellent coatings such as paint or varnish (remove and sand down as required). A traditional way to seal and protect wooden surfaces whilst achieving a sympathetic natural finish.Ipe: 6-8 weeks exposure. 006 Bangkirai is optically suitable and a very popular choice of colour tone.