Fujifilm NP-W126S Lithium-Ion Battery for X-Pro1, X-E1, X-M1, X-A1

Product Information

Apparently the cheapest aftermarket batteries fail pretty bad, but fortunately many brands offer pretty solid competitors to the original batteries. They often have almost the same capacities and also heat management under a heavy load seems to be alright. The FX1 charger will report the correct temperature of a thermistor equipped battery, but it does not terminate charging if the battery goes outside the 0°C to 45°C allowable charging temperature range. The user needs to stop the charging process if they notice that the temperature display is approaching the 45°C charge temperature limit." I don't think you will see any difference in the X-Pro2 because it was not designed to be take advantage of the features of the NP-W126s. For all versions of Fuji X ILCs except for the X-T2, the NP-W126 or the NP-W126s is the correct battery to use. For the X-T2, the NP-W126 will work if you don't use 4K video. fujirumors.com– JJC is offering a practical (and cheap) dual USB battery charger for Fujifilm NP-W126/S batteries

fujirumors.com– TESTED: Third Party Fuji Batteries? “Inflated capacity values. Some batteries almost Fraud!”… and the Winner is…? Tested Batteries Chart Explained The Perfect Battery Fujifilm NP-W126S Battery Best Third Party Battery Worst Third Party Battery However, even with a genuinely equivalent capacity to the OEM battery, there may still be differences in power delivery rate, self-discharge rate, and ultimate rate of decline in battery’s SoH (State of Health).

Movies: Standard output sensitivity equivalent to ISO 160 – 12800 in increments of 1/3 EV; AUTO; extended output sensitivity equivalent to ISO 25600 in., 3690k-dot OLED viewfinder; magnification 0.75× with 50 mm lens (35 mm format equivalent) at infinity and diopter set to −1.0 m−1; diagonal angle of view approximately 38° (horizontal angle of view approximately 30°) I also used my thermal camera, Flir One for Android ( iOS version exists too), to capture batteries after a heavy load. While the original battery shows mostly evenly distributed heat on its surface, the noname battery has much higher temperature in a smaller rectangle in the middle. This might be the reason for swelling of some batteries. Self-discharging

Visit us and you'll always find a friendly welcome. Our policy is to treat our customers as we would like to be treated ourselves, a simple ideal that we try hard to live up to. In Europe, there are very good Patona Platinum, Patona Premium and ExPro White. All of them offer >90% capacity of the original batteries and also they don’t seem to produce significantly more heat even after some heavy use. mm × 92.8 mm × 58.8 mm (35.4 mm excluding projections, measured at thinnest part)/5.22 in. × 3.65 in. × 2.31 in. (1.39 in.) Personally I have a couple of Fujifilm OEM batteries, but I am also satisfied with my Patona batteries (I think they are Watson branded in North America). With the X-T2 announcement and the new battery, I'm trying to get it around my head what the difference in the battery is? From what I can see in the pictures, the two are identical size and both are rated at 1260mAh.All the batteries lose their performance with time and usage. Their capacity decreases and the internal resistance increases. Don’t expect the very same performance from few years old batteries as you get from the new ones. The battery indicators in cameras are based on actual voltage of the battery. However, since the Fuji batteries have quite a different voltage curve, compared to all the aftermarket batteries, the remaining capacity shown by the camera isn’t accurate for non-Fuji batteries. This is mostly apparent on almost empty batteries — while the camera shows that the battery is still OK, it can actually be almost empty. Still pictures: Standard output sensitivity equivalent to ISO 160 – 12800 in increments of 1/3 EV; AUTO; extended output sensitivity equivalent to ISO 80, 100, 125, 25600, or 51200 My old original NP-W126 currently, after several years of usage, has roughly 1100 mAh, while it had >1200 mAh when new. Lower quality batteries can show more significant aging, the DSTE battery is already almost unusable. Conclusion We offer Fujifilm product accessories with real information and compatibility, which comes entirely from our professional channels and years of sales experience.

Essentially, the W126 and S version are interchangeable in all bodies. The S versions run cooler, and consequently are preferable overall. Especially so if you plan to shoot video for several minutes at a time. Well, that's a piece of information I've not seen. Where did you read that about the X-Pro2 design? B&H lists compatibility for the battery as: X-T2 and X-Pro2. Why do they identify these two as fully compatible but not the X-T1 and earlier x models?You must have sources that say B&H got it wrong. I'm genuinely curious. If the new batteries have the required circuitry to accurately display the level in % I'm all about that. Usualy, I Don't shoot video so until I bought a generic NP-W126S, I will use a NP-W126 when NP-W126S will be discharged…. Seconded. My only quibble is the built-in USB cable which is both short and somewhat inflexible. It doesn’t work well with my desktop power supply (which is magnetically attached to the edge of my desk) or really suit my travel set-up very well. I’d prefer the ability to use detachable cable plugging into a USB or, (reaching for the stars) USB-C port.Auto, Custom 1, Custom 2, Custom 3, color temperature selection, direct sunlight, shade, daylight fluorescent, warm white fluorescent, cool white fluorescent, incandescent, underwater