A rugged militarized style M.2 SSD NVMe enclosure that comes with dual-side M.2 SSD cooling with an aluminum alloy fin enclosure. The enclosure cum adapter comes with a JMS583 controller IC and supports UASP and TRIM. The USB 3.1 Gen2 Type-C interface provides a super-fast data transmission rate of up to 10 Gbps. The device features a write protection switch that prevents unauthorized modification of data and also prevents malicious software or malware. The enclosure looks very stylish and has great build quality. It supports Windows, Mac, and Linux operating systems. The JMS583 has passed UBS-IF's extensive specification testing to become the industry's first USB-IF Logo Certified USB 3.1 Gen2 to PCIe/NVMe bridge IC (TID: 5,040,109,048). The upcoming of next generation CF Express and SD Express ultra-high speed memory cards are also compatible with JMS583 which can become USB superspeed plus card readers or USB flash drives. The JMS583 has been in mass-production since April 2018.

NVMe SSD Enclosure, USB 3.2 Gen 2 10Gbps NVMe UGREEN M.2 NVMe SSD Enclosure, USB 3.2 Gen 2 10Gbps NVMe

Some major brands have already developed and accomplished the designs to go into mass production soon with JMicron’s JMS583. In addition, JMicron has also successfully collaborated with mainstream SSD manufacturers on JMS583 to develop PCIe/NVMe SSD module verification tools to be used in production lines. Format the NVMe SSD by going to Control Panel->Administrative Tools->Computer Management->Storage->Disk Management. Install the NVMe drive in the NVMe USB Adapter or Enclosure and connect it to the USB drive of your computer. Use "Create Rescue Media" on a flash drive (or writable CD/DVD) to create a bootable environment you'll use later If you want better cooling for your M.2 NVMe SSD then there are some NVMe USB Enclosures available that come with a fan. Below you can find such NVMe to USB SSD enclosures. ineo Type-C M.2 SSD NVMe enclosure (C2605)

Best NVMe USB Adapter Enclosures

Buy SSK M.2 NVME SSD USB Enclosure Adapter MOKiN M.2 NVME SSD USB Enclosure Adapter [Tool-free Design] A popular NVMe USB Enclosure Adapter that supports M.2 NVMe solid state drives up to 2280 form factor. It is not compatible with M.2 PCIe AHCI SSDs and M.2 SATA SSDs. For connectivity, it comes with a USB 3.1 Type-C port and offers a high transmission speed of up to 10 Gbps. The body of the adapter is made of plastic and the shell is made of aluminum which helps in heat dissipation to some degree. The adapter has a tool-free design and both USB Type-A and USB Type-C male cables come included with it. The device is plug and play and supports a wide range of operating systems that include Windows 7/ 8/ 8.1/ 10/ Linux/ MAC / Android. Buy ORICO M.2 NVMe SSD USB Enclosure ineo Type-C M.2 SSD NVMe enclosure (C2597) [Military Style Design, Rugged, Good Heat Dissipation, Write Protection Switch] Buy ineo Type-C M.2 SSD NVMe enclosure (C2605) ineo Type-C M.2 SSD NVMe enclosure (C2598) [Great Cooling, Write Protect Switch, Premium Design & Quality]

ANYOYO NVMe Enclosure, 10Gbps NVMe to USB Adapter USB 3.1 Gen

|Corsair LL120 x6 | Corsair RM750x White 2018 | Corsair Commander Pro | Corsair Obsidian 500D RGB SE | Corsair RGB LED Lighting PRO Expansion In addition, JMS583 embeds the USB Type-C™ control circuitry to support for both USB orientation during plug-ins and optimizes the internal power management control flow of the chip. This simplifies the client's product design and verification process which turns into faster design validation test cycle and shorter time-to-market. The JMS583 is mainly used in the development of PCIe/NVMe related products, such as converting a PCIe/NVMe SSD to a superspeed plus USB interface portable mobile storage solution. I've got a laptop with a 256 GB nvme drive that I want to upgrade to a 1 TB nvme drive. The thing is I don't want to reinstall everything, so I want to clone the drive, but my laptop (Lenovo Yoga 720 13) has the one nvme port. I/o gives me a thunderbolt and 2 USB 3.0 ports, one of which is of USB-A, and the other is USB-C.This will significantly reduce the cost and time needed for PCIe/NVMe SSD production in the factory, which will also accelerate the end-product’s time-to-market. JMicron believes that the market will always strive for extreme high-speed, low power consumption, thin and light solutions for external storage products. |You don't need both drives connected to the system at the same time to perform a cloning operation. As long as you have a third drive (USB disk, network share on NAS or PC) with enough space you can create a disc image running from the first drive then swap in the second drive and restore the image to the new drive.

USB M.2 SATA PCIe NVMe Solid State Drive Enclosure (M.2) - USB M.2 SATA PCIe NVMe Solid State Drive

Here are some of the best NVMe USB Adapters or Enclosures for use with laptops and PC. Sabrent NVMe & SATA SSD USB 3.2 Type-C Enclosure Most of the modern-day laptops that come with an SSD have NVMe SSD in them. It is because NVMe drives are much smaller and can easily fit in laptops, especially the slim ones that are becoming more and more popular these days. Also, in laptops that come with both SSD and HDD, an NVMe SSD is the only practical solution because nowadays laptops are becoming slimmer and they do not have that much space to accommodate two 2.5-inch drives. In such laptops, NVMe SSD is the boot drive where the operating system is installed. In today’s era, buying a laptop without an SSD is the biggest mistake you can make because even if you have a good processor and enough RAM, a traditional mechanical hard drive (HDD) can make your laptop sluggish on modern operating systems like Windows 10. An SSD is much faster than a hard drive and can even bring an older dead slow laptop to life if you upgrade its hard drive to SSD, 2.5-inch SATA SSD in this case because most older laptops do not have M.2 slot with NVMe support.A branded M.2 Adapter and Enclosure that supports both NVMe and SATA solid-state drives up M.2 2280 form factors. It uses a USB Type-C connector at both ends, supports up to 10Gbps data transfer rate, and is Thunderbolt 3 compatible. The frame is made of ABS plastic and there is an aluminum heatsink that sits on the M.2 SSD and the frame. The installation of the M.2 SSD is 100% Tool-Free and you do not need to install any additional drivers as it is completely plug-n-play. A small blue LED is present that indicates the transfer rate, and also lets you know whether the device is operational or not. The build quality of the device is good and it is also very sleek & portable. It supports Windows 7 or higher / Mac OS 10.5 or higher / Linux operating systems. A perfect M.2 SSD enclosure that can be used for cloning NVMe or M.2 SATA solid state drives and can also be used as a fast portable external drive for traveling purposes because of its super-compact form factor.

Best NVMe USB Adapter Enclosures for Cloning Laptop NVMe SSD Best NVMe USB Adapter Enclosures for Cloning Laptop NVMe SSD

JMS583 is a bridge chip that can turn a PCIe/NVMe product into an USB product. JMicron's embedded USB to NVMe data translation technology is able to create an external device to achieve more than 1000MB/s in performance. It is the industry's first chip to fully saturate the USB 3.1 Gen2 10Gbps bandwidth. Perform a restore operation targeting the new drive (also take advantage of the partition resizing feature to expand it to 1TB)Well, everything is good with NVMe SSD but the problem arises when you want to replace your current NVMe drive with a new one without losing your data and operating system. The main reason for NVMe SSD replacement is when your NVMe drive is at the end of its life or you want to upgrade to a larger capacity NVMe SSD. Most of the laptops today, especially the mainstream ones come with only one M.2 slot which makes it impossible to clone the NVMe SSDs without using any external hardware. If you have a desktop with multiple M.2 slots then you can clone your laptop NVMe SSD to a new NVMe SSD but if you don’t have a desktop then you will need an external NVMe to USB Adapter or enclosure. Using an NVMe to USB Adapter, you can easily clone your laptop’s NVMe SSD to a new NVMe SSD using good drive cloning software. Moreover, these adapters can be very useful for your PC also if your motherboard has only one M.2 slot because you need a second one for cloning. There are tons of NVMe USB adapters available today, especially from the smaller brands and a few from more popular brands. So, to help you select the best NVMe to USB Adapters, I have selected some of the best NVMe adapters of different types and designs. Best NVMe USB Adapter Enclosures This change of mind return policy is in addition to, and does not affect your rights under the Australian Consumer Law including any rights you may have in respect of faulty items. To return faulty items see our Returning Faulty Items policy. |EVGA RTX 2070 8GB XC Gaming OC @ 2145Mhz Boosted/ 1925Mhz Memory | WD SN750 500GB M.2 NVME | Gigabye 240GB SSD My Rig: AMD Ryzen 9 3900X @ 4.3Ghz | Asus Prime X470-Pro | Corsair Vengeance RGB Pro 32 GB (4 x 8GB) DDR-4 3000Mhz OC'd @ 3400Mhz 16-20-20-38  A relatively cheaper budget NVME Enclosure USB Adapter that supports up to M.2 2280 size solid state drives. It is only compatible with NVMe or PCI-E SSDs and does not support M.2 SATA and M.2 PCI-E AHCI SSDs. It uses a USB Type-C interface and is compatible with Thunderbolt 3.0. It can support up to 10 Gbps bandwidth when using the high-speed interface. The device uses an aluminum enclosure that helps in some kind of heat dissipation but nothing too great. A blue LED is present on the unit that indicates data transfer activity. A USB Type-C to USB Type-A male cable is included for using it with USB Type-A ports. The operating systems that are supported are Windows 7/ 8/ 8.1/ 10/ Linux/ MAC.