Seagate BarraCuda, 2TB, Internal Hard Drive, 3.5 Inch, SATA 6GB/s, 7.200 RPM, 64MB Cache, for Computer Desktop PC, FFP (ST2000DM008)

Product Information

After you install a device or update a driver for a device, Windows Vista or Windows 7 may not start Disconnect all external storage devices such as external USB, Firewire, and eSATA drives, jump/thumb/flash drives, cameras, and printers before proceeding with a Windows repair or recovery. Failure to disconnect such devices could result in serious data corruption. If you are simply going to install a new copy of Windows (the operating system), you first need to format and partition the drive, and then install Windows: If the drive successfully passes the diagnostics (but the Windows repair/recovery failed), then the drive itself is most probably safe to continue using. You should therefore, attempt to erase the drive and reinstall the operating system. See also Document ID: 196169 for more information on installing drives and Document ID: 188411 about the proper drivers in Windows.

I am attempting a new installation of a bootable Serial ATA drive in my PC and it is not detected correctly Open the computer case and remove the data cable from the hard drive. This will stop any power saving commands from being sent. Lyve: Periferie-naar-cloudplatform voor massaopslag Lyve Cloud: Voordelige objectopslag, ontworpen voor de multicloud Generally, if a SATA drive is configured as the bootable drive, then the computer relies on that drive to boot the computer and to launch Windows. It is the source of most of the computer's operations. So, if the computer suddenly stops detecting the bootable drive, this will almost certainly mean that the computer will fail to boot at all. Instead, some error message will occur, and it will become obvious that a serious problem has occurred. If your drive is otherwise displaying a lower capacity than you believe was advertised, please see Document ID: 172191 for all relevant information.Then insert the Windows CD/DVD in the CD/DVD drive and then reboot the computer. You should be able to install Windows as if from scratch. Windows-systemen met een verouderd BIOS die Extended Capacity Managergebruiken, hebben twee partities nodig op de opstartschijf om de volledige capaciteit te benutten.

Maak een einde aan de kosten en complexiteit van het opslaan, verplaatsen en activeren van gegevens op schaal.

Vergelijking met andere schijven

Keuze uit een enorme opslagcapaciteit van 500 GB tot 2 TB. Profiteer van de hoogste capaciteit in de dunste 2,5-inch harde schijf in een slanke vormfactor die systeemupgrades eenvoudig maakt. Windows Vista en nieuwerNative ondersteuning voor opstartschijven van 3 TB is alleen op UEFI BIOS-systemen en met gebruik van GPT-partities. For Barracuda 7200.11 drives and older, as well as certain Barracuda 7200.12 models) You can place a jumper on the drive to slow it down to 1.5 Gbits/sec, so older motherboards can support it.

If your motherboard only supports SATA1 (1.5 Gbits/sec transfer rate) and you are installing a SATA2 (3.0 Gbits/sec) or SATA3 (6.0 Gbits/sec) drive, the motherboard may not detect the drive. There are four options in that case: Please remember that these third-party programs do not have proprietary access to Seagate hard disk information, and therefore often provide inconsistent and inaccurate results. SeaTools is more consistent and more accurate and is the standard Seagate uses to determine hard drive failure.Windows Vista en nieuwerNative ondersteuning voor niet-opstartschijven van 3 TB vindt plaats met GPT-partities, wat beschikbaar is op alle systemen. Access the BIOS by rebooting the computer and, while it is in the process of booting, before the Windows screen appears, press the key that will open the BIOS. This key will vary by computer make and model, but it is often Escape, Delete, F1, or F2. Consult your computer manufacturer if you are unable to enter the BIOS. Each Seagate hard drive engages in regular self-tests, and most computers automatically run regular SMART tests on the hard drive(s) installed on them. SMART tests indicate whether a drive is approaching imminent failure. Thus, if a SMART error appears suddenly, it virtually always means, unfortunately, that the drive is about to fail and should be replaced. Vereisten voor systeemgeheugen: 1 GB en hoger voor 32-bits systemen; 2 GB en hoger voor 64-bits systemen. This set of troubleshooting steps will attempt to get the drive detected again, or to conclude whether the drive has failed and should be replaced.

Most new computers will automatically detect devices through the system setup program (CMOS or BIOS). As the system starts, the auto-detect feature may display the drive model number on screen. Seagate drive model numbers begin with the letters "ST". Some Serial ATA BIOS have a system setup that is not contained within the normal motherboard BIOS. If this is the case, the Serial ATA drive will only be displayed in this Serial ATA BIOS message. Please consult the motherboard or Serial ATA controller documentation for assistance with entering into the Serial ATA BIOS setup. Locate the storage drive in the lower window. Disk 0 is usually the boot drive. Disk 1 or Disk 2 may be the additional storage drive. Obtain an add-on controller card that can support more modern drives and connect the drive to that card. Disconnect all external storage devices such as USB, Firewire, and eSATA drives, jump/thumb/flash drives, cameras, and printers before proceeding with a Windows repair or recovery. Failure to disconnect such devices could result in serious data corruption. Extended Capacity ManagerDe software installeert een apparaatstuurprogramma om de volledige capaciteit te kunnen benutten op verouderde BIOS-systemen.

Kies uw SSD

Als uw systeem het Intel RST-stuurprogramma gebruikt, kan het lijken alsof uw schijf van 3 TB slechts 800 GB groot is. Zie ons ondersteuningsartikel over het Intel RST-stuurprogramma.