Sony SRS-X11 Compact Portable Wireless Speaker with Bluetooth/NFC - White

Product Information

The sound quality may change if water enters the speaker section of the system. This isn't a malfunction. The pairing mode of the speaker is released after about 5 minutes and the (BLUETOOTH) indicator flashes slowly. However, when pairing information is not stored in the speaker, such as at the factory settings, the pairing mode is not released. If the pairing mode is released before finishing the process, repeat from step 2. The last two ports are ones that you'll find in pretty much every Bluetooth speaker out there. You have the 3.5 input for wired listening and a microUSB port for charging the device. As I said, there are a lot tiny Bluetooth speakers out there. I like the JBL Clip Plus , Logitech X100 and Sol Republic Punk , to name a couple. From a sound standpoint, this little Sony competes well with those models and delivers better battery life -- a full 12 hours at moderate volume levels.

Unable to pair the speaker with a BLUETOOTH device - Sony Unable to pair the speaker with a BLUETOOTH device - Sony

For details on operating a BLUETOOTH device, refer to the operating instructions supplied with the BLUETOOTH device.

Before you start

Lastly, two volume buttons, one for decreasing and another for increasing the volume, finish off the control panel. A few of the buttons have rubber nubs near them, which makes no-look navigation of the controls quite simple. The speaker can be paired with multiple devices, but can only play music from one paired device at a time. For its size, I'm surprised by how full this speaker sounds. It won't win much praise, especially when put up against bigger speakers, but the SRS-X11 makes the most of its small size. If you're trying to pair the SRS-XB13 speaker, please visit the following article: I can't see " SRS-XB13" in my smartphone's Bluetooth list during Bluetooth pairing. If you exceed the maximum number of Bluetooth devices that can be paired (approx. 8), the oldest pairing information will be overwritten and replaced by any new pairing information.

Sony Wireless speakers | Argos Sony Wireless speakers | Argos

Once the BLUETOOTH devices are paired, there is no need to pair them again, except in the following cases:Put your speaker on a soft, dry cloth with the logo facing down to drain any water collected inside the speaker. Note: Connect your second speaker within a minute. After a minute or more, the Wireless Party Chain setting is canceled.

Sony Bluetooth Speakers Sony Bluetooth Speakers

Note: Complete pairing operations of the source device within 5 minutes. The pairing mode of the speaker ends after 5 minutes. If pairing mode ends, you must start pairing operations for the speaker over from the beginning. While you can get even cheaper Bluetooth models, the SRS-X11 is one of the better-sounding micro wireless speakers and offers 12 hours of battery life. You'll hear a beep, and the Bluetooth icon indicator flashes and the WPC indicator lights up, and the Bluetooth icon indicator turns off.On your speaker, press and hold the Pairing/Power icon button until the Bluetooth icon blinking indicator flashes rapidly.

SRS-X11 | Sony USA - Sony Group Portal Manuals for SRS-X11 | Sony USA - Sony Group Portal

Once Bluetooth devices are paired, there is no need to pair them again, except in the following cases: To use the speaker add function, pair with the speaker where the (BLUETOOTH) indicator flashes in white. Note: Connect the speaker within 30 seconds. After 30 seconds, the Wireless Party Chain setting is canceled. When pairing with two or more BLUETOOTH devices, perform the following pairing procedure for each device.After the Bluetooth connection is established, the Bluetooth indicator switches from flashing to steady. The speaker is not resistant to water pressure. Don't perform this step using high water pressure, such as in a shower. I say "if" because that's not the only way to orient the speaker. Looped through the bottom right corner is string that leads to a silicon hook. I enjoyed the versatility of this speaker yielded by its simple, silicon loop. It made bringing the speaker around on adventures easy and even kind of fun. When pairing with a BLUETOOTH device that cannot display a list of detected devices or that has no display, you may be able to pair the device by setting both the speaker and the BLUETOOTH device to pairing mode. At this time, if a passkey is set besides “0000” on the BLUETOOTH device, pairing cannot be done with the speaker. The speaker has dual passive radiators that help produce enough bass to keep the speaker from sounding too thin. Sarah Tew/CNET