Zinsser Perma-White Interior Matt Mould Resistant Paint 5 Litre

Product Information

Zinsser Perma-White Interior Matt Paint–is ideal for areas where a low sheen finish is desired. As a durable paint with a long lasting protection against mildew and mould, this matt finish will be ideal for basements and kitchens.

Zinsser Self-Priming Paint Matt White 2.5Ltr - Screwfix Zinsser Self-Priming Paint Matt White 2.5Ltr - Screwfix

NOTE: Minimise the use of the shower, avoid high levels of steam and condensation for the first week after applying the Perma-White, this is to allow it to fully harden and reach full moisture resistance, otherwise the coating may be damaged if it is subjected to condensation and water vapour while it is still curing.Due to its expert technical knowledge of the technologies and materials available across the industry, Promain has a reputation for outstanding service among its trade and retail customers. Protects interior walls, ceilings and more against mould and mildew - guaranteed for 7 years. Ideal for areas/rooms of persistent high humidity, frequent temperature changes and poor air circulation. The satin finish is recommend over the matt for high wear and tear areas due to increased durability.

Zinsser Perma White Mould Resistant Paint Satin | PaintWell Zinsser Perma White Mould Resistant Paint Satin | PaintWell

All surfaces must be clean, dry and free from anything that will interfere with the adhesion of the materials to be applied. Remove loose and failing material by scraping or brushing with a stiff bristle brush to a sound edge. Feather sound edges with a fine grade abrasive paper. Remove all visible signs of organic growth and treat the areas with Zinsser Mould Killer & Remover in accordance with the manufacturer’s instructions. Allow to dry.

The specificationfor swimming pool walls and ceilings Zinsser recommend is to prime first with Zinsser AllCoat (Solvent-Based), followed by 2 coats of Zinsser Perma-White Interior.No other sealers required, do not thin either product. Matt: Once dried the paint film is classed as a treated article and contains the surface biocide 4,5-dichloro-2-n-octyl-4-isothiazolinone-3-one 0.068% by weight. Technical Information: Soluble in the following materials: cold water and hot water. Very slightly soluble in the following materials: methanol and acetone. Zinsser AllCoat  Exterior is an ultimate performance, mould resistant paint that offers supreme protection to all exterior surfaces: wood, metal, masonry, plastic, concrete and cladding. It forms a vapour-permeable, low maintenance, water-shedding coating that is recoatable in 1 hour. Zinsser Perma-White Semi-Gloss Paint – The Zinsser Perma White Semi-Gloss paint is only available in Perma-White Exterior. However, due to improvements, this product can now be used both internally and externally. Due to its durability and wear and tear resistance, this semi-gloss finish is ideal for those surfaces that are subject to heavy wear and tear. We recommend using Perma-White Semi-Gloss Paint for trim, cabinets, doors or baseboards. It is also ideal for commercial use in hotels, nursing homes, school and hospitals.

Zinsser Perma White Mould Resisting Paint - Matt

Zinsser Perma-White Interior will be fine for this application. The substrate must be completely dry, remove unsound paint and wash down to remove soap/ shampoo splashes.If there are any bare areas these can be primed with Zinsser Peel Stop then apply 2 coats of Zinsser Perma-White Interior. Restrict use of shower for first 5-7 days to allow the paint to fully cure. Yes assuming the previously painted areas are clean, dry, sound and lightly sanded to provide a key.

Pallet agreements which are about to expire

NOTE: Perma-White® is formulated with a mildewcide approved for paint use and does not contain mercury or lead compounds. Recommended for application in high-humidity areas where a durable, low sheen finish is desired such as finished basements and kitchens. Warning: If you scrape, sand, or remove old paint, you may release lead dust. Special precautions should be taken during the surface preparation of pre 1960’s paint surfaces over wood and metal as they may contain harmful lead. When dry-sanding avoid dust inhalation by wearing a suitable protective face mask. Unfortunately this is something we couldn't advise on as the manufacturer has not carried out any testing, nor has any data on their products in regards of any kind of animal safety standards. Clean up spills and drips with a wet cloth or rag. Wash application tools in warm, soapy water immediately after use.