UPDATE: I’ve been asked about using liming wax to try to go lighter. I gave it a try! See my results here.

Rustins Briwax Original Teak - 400g | PaintWell

Once you've finished your furniture with Danish Oil, you can create a deeper sheen on surfaces that aren't likely to get wet by applying a coat of clear Briwax Original Wax over the top. The two different finishes create a beautiful depth to the shine.

Paint colours

We have a 30-day return policy, which means you have 30 days after receiving your item to request a return. Spirit-based dyes give a very intense and long-lasting colour deep inside the wood. Unlike many other finishes such as wood stains, Briwax Spirit-based dyes are not a finish in themselves. This means that you can get exactly the colour you want, and then protect it with oil as a final step.

Wood Wax | Woodcare | Screwfix Wood Wax | Woodcare | Screwfix

No, Briwax Danish Oil does not come in colours, but you can tint it with Briwax Spirit-based Wood Dye. The resultant coloured oil does not have a long shelf life, and so it should be mixed and used within a few days. The disadvantage of mixing the Wood Dyes with Oil is that you are committed to a specific colour. If you apply the Wood Dye to your wood first, you can add more or different colours until you are happy with the colour, and then seal the colour with Oil afterwards. If you apply tinted Danish Oil and don't like the finished colour, you will need to sand the finish off before you can re-colour the timber.

For most purposes, Teak Oil can be treated exactly the same as Danish Oil, except that the final finish is a high gloss. Apply at least two thin coats of Teak Oil. The more coats you use, the better the final gloss will be. Briwax Teak Oil is often used on outdoor furniture. Yes, you can use Briwax Danish Oil on your kitchen bench top, table tops, floors, window sills and doors (interior & exterior) as long as you follow our instructions. See the section on Protecting a floor with Danish Oil for more information on how to create a strong, waterproof finish with Danish Oil. The kitchen cabinets were in pretty good shape. They were generally free of dings, but some did have a few scratches. The bigger issue was that they were dull and dirty, and the finish had been worn down or even off in some places (like where they were grabbed to be pulled open). I also wasn’t in love with the orangey tone of them. So, enter Briwax.

Briwax! - Queen of the Household How to Update Oak Cabinets with Briwax! - Queen of the Household

Due to its expert technical knowledge of the technologies and materials available across the industry, Promain has a reputation for outstanding service among its trade and retail customers. You can mix the spirit-based dyes to achieve almost any colour. Even if you've already applied some dye, you can apply another colour and they will mix together. Briwax spirit-based dyes are based on methylated spirits, so you can lighten the colour by adding methylated spirits. Because they are a dye, not a stain, Briwax Spirit-based dyes don't create ‘tide-marks’ when they dry. You can wipe over the existing dyed area with more dye, and you won't be able to see the join. If you’ve got a lot to do, plan to spread the task out! The buffing did wear me out a bit, so I would just do several doors at a time, then take a break.Wax is not waterproof, and if spills are allowed to stay on waxed surfaces they can cause white spotting or watermarks. To remove these, just apply another coat of wax to the affected area. Applying new wax will remove the old wax and replace it with a new coat, which should remove the watermarks. However, if you allow the surface to remain wet for a long time, the watermark will get into the wood, and applying more wax won't solve this.