The BT 3000 Video Baby Monitor is a high-quality baby monitor that will help to give you that added peace of mind that your little one is resting or sleeping peacefully. It comes fully complete with a parent unit, a baby unit, two mains power adaptors and a user guide to walk you through the set-up process in a breeze. If your camera is paired, the image from the camera should be displayed on screen. The camera icon should appear on the top left or right of the screen. Multiple walls between the Baby and Parent units. Make sure that the distance between the units are obscured by as few walls as possible.

Hold the LINK button on the rear of the camera until the unit beeps and the image from the camera appears on the screen

In This Article

You can clean the camera using a soft dry cloth or a microfiber cloth for the lens. Don't use abrasive or chemical liquids. The push-to-talk button is another decent feature that lets you speak into the monitor and have the voice come on at the camera end where the baby can hear you. The wireless connectivity between the camera and the monitor is super-impressive, working at the other end of the house across two floors and through lots of walls. BT says it can work up to 250 metres. It will even work in the garden, if you don’t go too far. The range is the maximum distance the Baby unit and the Parent unit can have between them and still work together. BT Video Baby Monitors are tested to ensure they have a range of up to 50 metres indoors and 250 metres outdoors. A high-pitched noise is likely to have been caused by the units being too close to each other. We recommend that you keep the units at least one metre apart and preferably in different rooms. Why can't I hear any sound but the lights are flashing?

The Parent unit may be on standby mode - please press the POWER button once to activate the display The Parent unit may be out of range of the baby unit; if this is the case, the parent unit will beep to let you know. In this scenario, please move the units closer to one another, but keep them at least one metre apart to avoid interferencePlease note that our products have been designed to ensure they cannot be tampered with, and contain non replaceable batteries. Any attempt to replace the battery will void the warranty on the product. Automatic night vision is still one of the most useful features. The 6000 has a super-clear night vision system that is as vibrant in the dark as it is in the day. If the Parent unit screen is showing the menu and usual icons but you do not see an image from the Baby unit, please ensure the Baby unit is plugged in and the units are in range The rear features a USB-C port for charging, which is ideal if you already have a phone charger, or another device with that cable. You can even charge the unit in the car.

These ranges can only be achieved in ideal conditions when there is a clear line of sight between the Baby and Parent unit. Any obstruction between the units will reduce the range significantly. If the camera image is not displaying, try switching both Baby and Parent units off and trying again. Although the monitor benefits from a large display, it falls down slightly on quality. The resolution of the screen does look very granular. It works just fine for the job, but takes a bit of getting used to at first. The key here is that you can detect breathing movements in the little one and see facial expressions easily enough, so it does the job well.Drill holes to the same depth as the wall plugs and insert suitable wall plugs for the type of wall. Screw in the screws through the base of your camera Large metal objects and other electrical devices can impact the signal. Try relocating any object that could be causing interference The most prominent feature of the 6000 unit – over the 5000 or 3000, for example – is that 5-inch screen. It’s a colour panel that will also display in night vision automatically when the camera detects light is low.