Joined in 2023 
82 
63 About this deal
If your camera does not have a rotating screen, it will be difficult for you to see that, so you’ll need an eye piece adapter like this one called a Right Angle Finder made for your camera. This C-Stand comes supplied with a detachable 20” Boom arm with 2x 2.5” Grip heads for added versatility. The boom arm can be used to mount light fixtures enabling them to be positioned above or below your subject. It can also be used to hold accessories, such as reflectors, scrims, flags, etc. This section needs additional citations for verification. Please help improve this article by adding citations to reliable sourcesin this section. Unsourced material may be challenged and removed. ( April 2020) ( Learn how and when to remove this template message) The Studio Robust C-Stand Stainless-Steel Turtle Grip & 20" Arm Set is a special robust, heavy-duty type of light stand that is widely used in both the filmmaking and photography industries. Made from Stainless Steel, C-stands are capable of holding heavy lighting fixtures such as light banks, and strobes with large or heavy modifiers as well as other accessories such as scrims and flags, etc. C-Stands were originally used in the early days of cinema and were used to hold up large reflectors which reflected Sunlight to illuminate the set before the introduction of artificial lighting later. You can use this arm for your overhead shooting with smaller cameras. Again, you have to counterweigh it when doing so. I highly urge you NOT to rig any of the bigger pro DSLR’s this way. They are just too heavy. 4. The Legs
a b Matthews Studio Equipment (2022-07-26). "40" C+Stand Spring Loaded Turtle Base". matthewsgrip . Retrieved 2019-11-06. Also notice the tallest leg is in the direction of the arm. This will help to ensure that the stand won’t fall over. It only has three legs after all. So you are putting the weight over the largest leg. They are used to rig anything and everything you can think of – fill cards, lights, flags, silks, scrims, diffusion panels, you get the idea. They are not commonly used to rig cameras though.
Connect with us online
The 161cm Studio C-Stand Stainless with 20” Boom is made from stainless steel, with a shiny chrome finish, which makes it extremely strong, and capable of taking loads of up to 10kg in weight. This makes them ideal for heavy light fixtures used in TV and Film productions, as well as in professional photographic studios.
Since a stand is used to hold a piece of gear high above or far off to the side, the base of the stand must be weighed down, commonly with shotbags, sometimes with sandbags. The bag is slung over the top of the tall stand leg so the weight is fully on the stand and not the ground. [4] [5] Types [ edit ] Matthews Studio Equipment (2022-07-26). "20" C+Stand w/Spring Loaded Turtle Base, includes Grip Head & Arm". matthewsgrip . Retrieved 2019-11-06. This 161cm Studio C-Stand Stainless has three nested legs with varying leg heights, which enables you to position multiple c-stands really close together in a way that is not possible with regular light stands. The legs also fold flat for storage and transportation.a b c d Box, Harry C. (2010). Set Lighting Technician's Handbook, Fourth Edition. Focal Press. pp.75–82. ISBN 978-0-240-81075-1. The arm can be used in a few ways. You can have a 40 inch arm or a 20 inch arm. The arm also has a grip head on it. You can put a light on the end of the arm and extend it out – though you always have to counterweight this type of rigging. The 161cm C-Stand with 20” Boom arm, is an essential piece of kit, ideal for any modern studio to fit the needs of photographers and videographers everywhere. They come in two sizes, a 40 inch stand or a 20 inch stand, also called a Shorty. The Parts Of A C Stand 1. TheColumn A Punky C-Stand is a 20" C-Stand with a smaller base and footprint than the standard 20" size. [12]
It is a simple yet versatile addition to your studio’s equipment arsenal. The clamping knobs are designed to securely fix the light modifiers in place with added safety, ensuring your setup won’t be compromised. However, I keep seeing tons of bloggers telling people this is THE way to do an overhead shot and many of them are not using the C-stand properly for their camera. So this post is to show you how to do it properly if you really want to use this method. This 161cm Studio C-Stand Stainless features a detachable base which makes storage and transportation a lot easier. The base of the C-Stand features a 1-1/8” Junior-Pin receiver, which used together with the main central column of the C-stand or can be used with heavier light lighting fixtures that use the larger Junior pin connection such as Arri lights, enabling you to use the legs like a heavy-duty floor stand.
Stands
There are 100’s of items that are made that can attach to a C Stand arm. There aren’t a lot of ways to attach a camera, because of what I mentioned above. The PIXAPRO 2.5-inch C-Stand Grip Head enables you to mount various accessories such as boom arms, scrim frames, reflectors, flags etc. to your C-Stand or regular light stand. With its heavy-duty Stainless-steel construction, this grip head can effortlessly hold heavier accessories. It also features a standard 5/8-inch Baby-Pin connection, that enables it to be mounted onto virtually any C-Stand or light stand on the market.
Great Deal 
New Comment