Non-rewirable plugs and connectors are typically permanently molded onto cords, and cannot be removed or rewired without cutting the cords. The C1 coupler and C2 inlet were commonly used for mains-powered electric shavers. These have largely been supplanted by cordless shavers with rechargeable batteries or corded shavers with an AC adapter. There is some public confusion between C13/C14 and C15/C16 couplers, and it is not uncommon for C13/C14 to be informally referred to as "kettle plug" or "kettle lead" (or some local equivalent). The C6 inlet is used on laptop power supplies and portable projectors, as well as on some desktop computers, some LCD monitors and recent LCD televisions from LG.

IEC to Cloverleaf Power Cables - C14 to C5 Mains Leads | TVCables IEC to Cloverleaf Power Cables - C14 to C5 Mains Leads | TVCables

In European countries the C15/C16 coupler has replaced and made obsolete the formerly common types of national appliance coupler in many applications.IEC - SC 23G Dashboard > Projects / Publications: Work programme, Publications, Stability Dates, Project files". www.iec.ch . Retrieved 2023-05-12. A C8B inlet type is defined by the standard for use by dual-voltage appliances; it has three pins and can hold a C7 connector in either of two positions, allowing the user to select voltage by choosing the position the connector is inserted. [22] Pin temperature is measured where the pin projects from the engagement surface. The maximum permitted pin temperatures, are 70°C (158°F), 120°C (248°F), and 155°C (311°F), respectively (the higher temperatures are not applicable to interconnection couplers). The pin temperature is determined by the design of the appliance, and its interior temperature, rather than by its ambient temperature. Typical applications with increased pin temperatures include appliances with heating coils such as ovens or electric grills. It is generally possible to use a connector with a higher rated temperature with a lower rated appliance inlet, but the keying feature of the inlet prevents use of a connector with a lower temperature rating. Interconnection cord set: "assembly consisting of one cable or cord fitted with one non-rewirable plug connector and one non-rewirable connector, intended for the interconnection between two electrical appliances".

C5 Cloverleaf Power Leads and Mains Cables - Cabledepot

The dimensions and tolerances for connectors, appliance inlets, appliance outlets and plug connectors are given in standard sheets, which are dimensioned drawings showing the features required for safety and interchangeability. Very common on personal computers and peripherals. Commonly referred to as a "kettle cord" or "kettle lead", [17] [18] but kettles in countries using 120V require the C15/C16.a b "IEC 60320-3:2014+AMD1:2018+AMD2:2022 CSV | IEC Webstore". webstore.iec.ch . Retrieved 2023-05-13.

IEC 320 C13 Power Supply Cable 1.8m - Screwfix Philex 5A IEC 320 C13 Power Supply Cable 1.8m - Screwfix

The mains appliance couplers are all engineered to connect an appliance via a power cord to mains power. For use in very-high-temperature settings, such as some stage lighting instruments. Similar to C15/C16, but the top is narrowed to exclude the C15 cord connector. The IBM Wheelwriter series of electronic typewriters are one common application. Three-wire cords with C13 connectors, which are easier to find, are sometimes used in place of the two-wire cords for replacement. In this case, the ground wire will not be connected. These cables are sometimes informally referred to as a "kettle cord" or "kettle lead", but the C13/14 connectors are only rated for 70°C (158°F): a device such as a kettle requires the C15/16 connector, rated for 120°C (248°F). Xbox One [19] and some Xbox 360 power supplies, [20] some vacuum cleaners, CPAP machines, audio equipment, televisions, medical devices, IBM Wheelwriter typewriters.IEC 60320-1 defines a cord set as an "assembly consisting of one cable or cord fitted with one plug and one connector, intended for the connection of an electrical appliance or equipment to the electrical supply". It also defines an interconnection cord set as an "assembly consisting of one cable or cord fitted with one plug connector and one connector, intended for the interconnection between two electrical appliances". This kind of coupler is used by Roland Corporation for a couple of synthesizer and drum-computer models (for example: TR-909, D-50) and by Revox for many older models of their hi-fi equipment (for example, A76, A77, A78, B77, B225). Was also used heavily on Marantz hi-fi equipment in the 1980s and 1990s.

C5 Cloverleaf Power Cord / Mains Cable Lead / UK Type Plug

IEC 60320-3: Standard sheets and gauges. [4] First published October 31, 2014, this part initially included the standard sheets for both appliance couplers and interconnection couplers. In a 2018 amendment, the standard sheets for the IP couplers defined by 60320-2-3 were added. [9] For appliance couplers the various coupler outlines are designated using a combination of letters and numbers, e.g., "C14". The connector supplies power to the appliance inlet. The appliance inlet is designated by the even number one greater than the number assigned to the connector, so a C1 connector mates with a C2 inlet, and a C15A mates with a C16A. Interconnection couplers have single letter designators, e.g., "F". They consist of a plug connector and an appliance outlet. The plug connector is the part integral with, or intended to be attached to, the cord, and the appliance outlet is the part integrated with or incorporated into the appliance or equipment or intended to be fixed to it, and from which the supply is obtained. A cable consisting of a C13 and an E interconnection connector is commonly mislabeled as an "extension cord", as although that is not the intended purpose, it can be used as such. They are also commonly mislabeled as C14 instead of E. Cord set: "assembly consisting of one cable or cord fitted with one non-rewirable plug and one non-rewirable connector, intended for the connection of an electrical appliance or equipment to the electrical supply".Similar to C13/C14 coupler, but unearthed. A C18 inlet accepts a C13 connector, but a C14 inlet does not accept a C17 connector. IEC 60309 specifies larger couplers used for higher currents, higher voltages, and polyphase systems. Appliance inlet: "part of the appliance coupler integrated as a part of an appliance or incorporated as a separate part in the appliance or equipment or intended to be fixed to it". Appliance outlet: "part of the interconnection coupler which is the part integrated or incorporated in the appliance or equipment or intended to be fixed to it and from which the supply is obtained".