Cuprinol Garden Shades Beaumont Blue 1 Litre CUPGSBMB1L

Product Information

A cookie set by YouTube to measure bandwidth that determines whether the user gets the new or old player interface. Untreated wood: should be pre-treated prior to adhesion test with an appropriate wood preserver to prevent rot and decay. Apply in dry conditions, above 5 degrees Celsius and when bad weather is not forecast, minimum of 2 coats required. The final colour will vary depending on the surface and number of coats. If adhesion is inadequate on previous coatings, lightly sand before application. Make sure wood has been pre treated with appropriate wood preserver to prevent wood and decay.

Cuprinol Garden Shades Wood Paint, 1L, Beaumont Blue

Cuprinol Garden Shades Beaumont blue Matt Wood paint 0.05L.You can apply this wood paint from the Cuprinol Garden Shades range to using a brush roller or spray to colour and provide protection. It takes 8 hours to dry and will cover up to 12m² per litre on average. Before you begin, make sure that you always stir the product thoroughly before emptying the contents into the sprayer and refer to the sprayer instructions for full instructions before every use. Before you begin, ensure that any nearby areas have been covered encase overspray occurs. Any overspray that may occur should be cleaned up immediately with water and household detergent. Free sachet delivery is available on all Rust-Oleum sachets. These are shipped direct from the manufacturer using Whistl. Can take 5-10 working days.

Pre-order

With a promise of 6 year weather protection on wooden surfaces, this water based paint takes approximately 8 hours to dry and covers up to 12m² per litre on average. Easily applied with a brush, roller or sprayer, this beautifully designed paint is available in 2 sizes including Cuprinol Garden Shades 1L and Cuprinol Garden Shades 2.5L. For optimum results, a maximum of 2 coats is generally required.

Cuprinol Garden Shades Beaumont Blue - Matt Wood - Wickes

This cookie, set by YouTube, registers a unique ID to store data on what videos from YouTube the user has seen. Stir thoroughly before pouring contents into a Cuprinol sprayer. Overspraying surrounding areas can be minimized by avoiding spraying in windy conditions and by using cardboard or plastic as a shield. Any overspray should be cleaned up immediately (whilst still wet) with water and household detergent. Test a small area first for colour and adhesion: Colour the final colour will depend upon the type of surface, previous treatment and number of coats applied. If using more than one can it is advisable to mix them together in a container or finish in a corner before starting a new can. Adhesion: if adhesion is inadequate on previously coated surfaces, lightly sand before application.Specially designed to colour, protect and brighten up your garden furniture, shed & fence. Cuprinol Garden Shades allow the natural texture of the wood to shine through