Now that we’ve gone through the three primary types of hinges, it’s time to talk about another key piece of the hinge puzzle - the manufacturer. While there are plenty of affordable hinge manufacturers on the market, there is one that stands above the rest - OBE. The edge of each eyepiece extends out beyond the shape of the lens. This part is called the endpiece, The component connected to this part is the hinge which holds the temples to the frame front. Temples

An internal spring hinge, on the other hand, can’t be repaired or replaced. Typically the entire temple needs to be replaced, because the replacement comes with a fully working spring hinge. Non-gel toothpaste: With a soft cloth or cotton pad, apply a small amount of toothpaste to your scratched lenses. Rubbing in a side-to-side motion, gently buff-out the surface scratches. To clean your lenses, immerse your frame in lukewarm water mixed with dish detergent. Use your thumbs to gently rub the lenses clean of any residual toothpaste. Dry using a microfibre cloth.Insert a paper clip or push pin into the gap that opened to keep the hinge in its extended position. Yes, if your plastic glasses are snapped, they can be fused together using acetone and reinforcement such as adhesive tape or heat shrink tubing. Metal glasses frames are less easily fixed and will probably need replaced if they are snapped at the bridge, hinges or temples (arms). I glued the hinge to the lens side of the frame first as I knew the earpiece would be easier to adjust for the final alignment of the two parts. I noticed that for some reason if I lined up the earpiece to be level and symmetrical with it's counterpart while the glasses were open, it was slightly "off" when closed. I decided to leave it that way because the fit and comfort during use was more important than having them line up when closed.

If the lens is being stubborn, you need to heat the frame more thoroughly to make the plastic more malleable Second, I used a standard BIC style lighter to heat the tip of the pliers' jaws. Care was taken to not heat or burn the plastic directly.Internal spring hinges are integrated in the temple itself and are practically invisible. This looks a bit nicer, but is regrettably also harder to deal with when it is broken. Does this repair guide also work for sunglasses? Glasses frames made of acetate can be re-polished to remove any scuffs or scratches. Avoiding your lenses, you can do this at home using various polishing methods and a soft cloth. However, there are services online or willing local opticians who can do this for you professionally using motorised polishing mops.

I found out that I could perform the operation with a donor from the hardware store sold as a hinge for small wooden crafts. Remember, when it comes to eyeglasses, the hinges can make or break the frames. While there are a variety of styles that are used by eyeglasses manufacturers, one style remains the best - the OBE hinge . Frames without hinges are engineered for an active lifestyle. In a career or hobby where your glasses need to flex with your movements, hingeless frames are a perfect option. With their innovative, flexible temples, hingeless glasses are designed to grip the head and move with you. Hingeless Cons: While they are great options for these purposes, hingeless designs might not fit as snugly on the nose as glasses with OBE hinges . They are also difficult to repair, as any sort of damage will result in the entire pair of frames needing to be fixed or replaced. What are OBE Hinges Leave your frame to let the glue or acetone fully ‘cure’ for 1-2 hours before removing the tape from your lenses

expression

You’d find that the sturdiest one out of them all are the seven-barrel hinges. However, compared to five-barrel hinges, they can be a lot more difficult to adjust and repair. Not resistant against the jerks and sudden movements of intense physical activities. Your glasses might fall off during rigorous activities such as jogging. If you wear plastic frames: Once you’ve soaked the arms of your glasses in warm water for 30-60 seconds, gently apply an upward and outward pressure on the end of the arms to get a more relaxed fit. If your new pair of glasses tend to slide off your face or don’t fit securely, you can easily adjust a few barrels inside the hinges to give you a snug fit.