Globber 632-106 Childrens Explorer Trike 4 in 1 Including Harness and Adjustable seat 10 Months to 5 Years, Lime Green

Product Information

Press the red button on the side of the middle column of the safety bar to release; repeat for the left- and right-hand side bars.

The Globber by Plum® Explorer Trike 4in1 allows for maximum product usage with an all-in-one baby tricycle for toddlers aged 10 months+ and balance bike for ages 2 to 5. tool-less design allows you to easily switch between different modes without the need for any tools or screws—EXPLORER TRIKE 4in1 DELUXE PLAY has spring-loaded buttons and knobs to seamlessly transform from push trike to balance bike. More mobility child grows; the more potential hazards increase. At home, be sure to remove frames or mirrors hung too low and could break, and any object that could fall in the event of impact. Corner table can also be a danger. Warning! A parcel bag other than one recommended by the manufacturer is used, the tricycle may become unstable.Clean trike with a slightly damp cloth (cold water) and mild soap. Never use a corrosive or abrasive substance to clean the product.

When assembled as a toddler tricycle, it can be adapted for when kids develop. From Infant Trike when they are 10 to 36 months, to Guided Trike for 18 to 36 months, to Training Trike for 24 to 36 months – and for when they are ready, a Balance Bike for 2 to 5 years.Put the seat on top of the saddle; make sure the knob on the seat is aligned with the saddle slot, so it can slide through the saddle slot. To secure the seat to the saddle, turn the knob under the seat 90 degrees. Insert the middle safety bar in the hole at the front of the seat; press the red button on the side of the middle safety bar and push until the red button is hidden in the seat. Slide the sides of the safety bar into the gaps on the side of the seat. The parking devices on the rear wheels must be pointing inward when they are installed for all trike stages. See below instructions on how to install the parking bar on the wheels: Children should be supervised by adult while riding this product. Special care should be taken to instruct children in safe riding. Press the red button on the side of the middle safety bar and push until the red button is hidden in the seat.

Braking for walking bike: The product can be braked with the feet. The child can stop moving by stopping walking/running. Please take care that your child can always stop from the speed it produces and wears appropriate shoes. Install both wheels with the parking bar into the trike’s frame. Place both wheels in the hexagonal slots at the rear of the trike frame and ensure that the parking devices are upwards and don’t touch the ground. Once the wheels are in the correct position, you need to screw the knobs into the wheels’ slot to ensure the wheels will remain securely in place. BALANCE BIKE MODE The final stage of the EXPLORER TRIKE 4in1 is the balance bike mode. The best way for little ones to showcase their new skills learned from the other modes.Make sure the bar is securely fixed before using the product. The parking bar is only applicable to EXPLORER TRIKE 4in1’s infant trike mode. Remove the parking bar before using the products in other modes. Warning! The parking bar of the parking system is only applicable for the infant trike mode. Remove the parking bar before using the products in other modes. Do not use on the public highways, examples of safe riding area: To be used on flat and no gravel areas (playground, Public Square)