The most common reason why your Bluetooth headset is flashing red and blue is it is unpaired. The headphones are looking for a connection. If you are facing charging or connectivity problems with your Beats headphone then try to reset them. If you have call as well as volume button along with power button - then you might need to perform combination of power and call or call or volume button by pressing them for up to 10 seconds.

Headphones come in different shapes and sizes, which is why it’s a must that you replace your headphone cushions with perfectly fitting earpads. If you’re having a hard time pairing your devices, the problem could be interference. The solution to this is easy. Simply move away from your router and try the pairing process again. Conclusion The fabric can stretch just enough for you to remove the ear pads without tearing them as long as you’re careful. Method 2: For Glued Headphone Pads If, for example, the status light is a constant blue, it usually means the headphones are connected with your smartphone, laptop, or speaker. They’re ready to use. An orange light may mean the battery is at a medium level and you need to charge the headphones in a few hours. It may also mean that the headphones are currently charging.Bluetooth and Wi-Fi both use invisible waves to connect devices. These waves are in the same frequency and can mix with one another, causing interference. Wait for the status lights to blink red and blue. This tells you the headphones are now in pairing mode. The best way to have perfectly fitting headphone pads is to buy the same pads that the manufacturers use for your specific headset model. Simply look up your headphone model and search for the associated replacement ear pads that are compatible with it. For any mode of TaoTronics - TT-BA07/TT-BA08/TT-BA09/TT-BA12, connect with desired device. Once its connected it will turn solid blue. The average size of headphone pads that you should look for is 2.75 inches or 70 mm. Determine Which Material to Buy

This should pair your headphones with your device. It will also stop the status lights from flashing red and blue.Use this process if you’re using in-ear headphones or a headband. Please consult the Help Guide for more information. Note: For Truly Wireless headphones, consult the Help Guide for your specific model.

Removing moisture also prevents the development of any odors, so you won’t have to worry about your headphones smelling bad. Keep your ears clean Cleaning the ears We hope that with this in-depth guide, you were able to successfully replace your headphone pads, while also learning a thing or two about how to take care of them to improve longevity. Even if multiple devices become available, your device will only establish a Bluetooth connection with the device that you choose – unless it was previously connected and automatically connects.

🍪 Privacy & Transparency

On an iPhone, tap the "i" icon next to the name of the headphones to pull up a screen with the option to Forget This Device. Tap it, and it'll be removed from your list. The process varies across different Android devices, but generally follows a similar pattern. The next time you put your headphones in pairing mode, they'll show up again on your phone's menu. ICnnneizt the equipment into an ntllie'l air a circuit different from that to which the receiver is Press and hold the call button as well as volume up and down buttons until the light flashes steady blue. There are a few reasons why your Bluetooth headset is blinking red and blue. As mentioned previously, this is usually due to pairing mode.