We highly recommand Ni-MH cell battery to instead of Ni-Cd cell battery.Ni-MH Technology means less memory effect, charge and use whenever you want to. Much better than Ni-Cd. Ni-Cd, Ni-MH and Li-ion batteries will self-discharge during storage; remember to recharge the batteries before use. Prevent the Memory Effect - Li-Ion batteries do not suffer from the memory effect, but Ni-Cd, NI-Mh batteries have memory effect. Keep the power tool battery healthy by fully charging and then fully discharging it at least once every two to three weeks. In practical terms, a 3.0 Ah battery delivers the same performance as a 2.0 Ah battery in terms of outright power — voltage output — but it will continue to deliver that power for longer. It’s like having three gallons of gas in the tank instead of two.

Keep the batteries at around 60°F. Extreme cold will drain your rechargeable batteries. Never leave batteries in a vehicle or shed where they might freeze because this can cause permanent damage. NiCad batteries are more tolerant than NiMH, and while early Li-ion were susceptible, Makita’s LXT batteries handle the cold surprisingly well.This PA18 battery has been manufactured with high quality components. It conforms with the exact specification of the original manufacturer and the battery is guaranteed against all manufacturing defects. This rechargeable MAKITA PA18 power tool battery (cordless drill battery) can replace the original battery of the following part numbers:

time and has not been scientifically proven to work, so in most cases, your best bet is to replace the old battery. OEM power tool batteries tend to cost more than an aftermarket power tool battery. UK Drill Battery offers most varieties of high quality aftermarket power tool batteries that meet your budget and need. Always use the correct combination of battery and charger. Never try to mix them, even if the battery fits physically. You’ll either undercharge, which is pointless, or overcharge, which reduces battery life and can be dangerous. FAQ Q. Is it better to always use Makita-brand batteries? I’ve heard copies can be dangerous.Recharge batteries based on the type. There’s some confusion about whether you should let batteries run all the way down before recharging. It depends on the type. NiCad batteries have what’s called a “memory effect.” For example, if they’re still one-quarter charged when you recharge them, they “remember” that, and only provide a three-quarter charge. This effect gets worse each time, so they need to be “deep discharged” (run as flat as possible) before recharging. NiMH and Li-ion batteries don’t have the same problem, so you can recharge them whenever convenient, as soon as your tool isn’t working at peak performance. Don’t overcharge the batteries. Overcharging can dramatically reduce the performance of your batteries, particularly NiCd and NiMH types. A short while won’t make much difference, but don’t leave batteries in the charger for any longer than necessary after they’ve reached full charge. Some Makita batteries have circuitry to prevent overcharging, but it’s best not put it to the test. Makita’s Lithium-ion Extreme Technology (LXT) batteries have useful charge indicators.

This battery has been manufactured with high quality components. It conforms with the exact specification of the original manufacturer and the battery is guaranteed against all manufacturing defects. Please ensure the battery that you are going to buy fits your power tool's brand, model number and battery's part number. of time and use. Some people say that you can break up the crystallization by running the battery at a very low volt (.5V or less)

More Views

Cordless drill batteries are expensive. So get with the program and follow these battery care tips to get the longest life and best performance out of them. Our replacement MAKITA PA18 power tool batteries are usually lower in price and usually exceed the specifications of OEM MAKITA PA18 power tool batteries. As part of our ISO 9001 quality procedure, quality control tests are frequently carried out on all our cordless drill batteries. There are several steps you can take to help you get maximum performance from your power tool battery: Put a new cordless drill battery on its charger for a minimum of 18 hours before using it for the first time.

It depends" is the correct answer. Factors such as temperature, the material being drilled, whether the drilling is non-stop or intermittent, the speed that you use- all these will affect a cordless drill battery's usage time for a fresh charge. Here are some formulas to help give you an idea of how long the battery will last. Amp hours = number of amps x number of hours. Amp hours / number of amps = number of hours. This rechargeable MAKITA PA18 power tool battery (cordless drill battery) is also compatible with the following power tool (cordless drill) model numbers: Don't store a discharged battery that has less than one-half charge. Give it a full charge and then store it.A. Makita warns that non-genuine batteries could perform poorly, catch fire, damage the charger, and so on. Their use will certainly void the tool warranty. Any of these things might be true, but let’s not forget that Makita has a vested interested in selling you its own battery! With NiCd and NiMH batteries, the power starts fading away the minute you start using it. That doesn’t sound particularly bad, but in reality you’re almost never getting peak performance. With Li-ion batteries, though the eventual drop-off is more dramatic, they deliver consistent power for longer. Our aggressive pricing allows us to distribute only the freshest batteries ensuring you receive the best performing batteries available. Use the full capacity of the battery between charging for best results. Simply put, as a rule of thumb, you should discharge completely and charge completely.