LTP MATTSTONE Sealer - Impregnating Stone Sealer (1 LITRE)

Product Information

Claybrook Handmade Terracottatilesare produced from natural materials and clays, so will vary in tone, surface texture and size. The nature of the handmade production can mean that pitting and uneven edges are normal and part of the product’s character. Shake bottle before use. Apply LTP Mattstone H20 generously and evenly using a lint free cloth, lamb’s wool applicator, paint pad or sponge. Ensure even distribution by wiping over several times. After 15 minutes, remove any excess sealer with an absorbent cloth. Polished surfaces should be finished after removal of excess by buffing with a soft lint free cloth or machine with buffing pad. This should be done while the sealer is still wet on the surface. Do not allow residues to dry on the surface.

LTP Mattstone Impregnating Sealer For Natural Stone Tiles - 1 LTP Mattstone Impregnating Sealer For Natural Stone Tiles - 1

It is safe for use on any type of grout and can be used both indoors and outdoors. This spray is great for repelling water, food stains, grease, mould, mildew, and more. One of the best things about this product though is that it is completely colourless and protects the natural colour of the grout, rather than altering it like some other grout sealing products. Key Features LTP Mattstone is a natural, matt finish impregnating sealer that will delicately enhance the colour and texture of all natural stone and porcelain tiles. LTP Mattstone helps protect against staining and it strongly repels water, oil and grease while allowing surfaces to breathe. LTP Mattstone H20 is a natural finish, water based impregnating sealer. It delicately enhances colour while helping protect against staining. LTP Mattstone H20 strongly repels water, oil and grease, and allows the surface to breathe.Ensure surface to be treated is completely clean, dry and free from dirt, grime, cement and grout. If necessary, first wash surfaces with a dilute solution of LTP Grimex, at 1:10. Rinse well to remove residues and leave to dry (24hrs). Shake the bottle prior to use. Ensure surface to be treated is completely clean, dry and free from dirt, grime, cement and grout. Apply 2-3 coats of LTP Mattstone with a soft cloth or brush allowing at least 2 hours between coats. More absorbent floors may require further coats and on such floors the product should be generously applied. 1-2 hours after application, rub over the surface with a soft fluff free cloth or buffing machine to obtain a uniform finish and remove any material not yet absorbed. LTP Mattstone will dry after about two hours, but will take a further three days to become fully resistant. N.B. The aim is to completely fill the substrate with Mattstone without over applying it. Do not apply in direct sunlight.

Sealer in 2023 - Perfect Bathroom The Best Grout Sealer in 2023 - Perfect Bathroom

Apply 2 coats of Ironwax Satin/Gloss with an hour between coats. Then allow 4 hours for the finish to cure before starting the grouting process using Ardex FL grout. If the tiler is not using our recommended Ardex FL grout, then please test your chosen grout on the surface of a sample tile, to ensure the grout can be cleaned away successfully.A natural finish water based impregnating sealer. Delicately enhances colour. Helps protect against staining. Mattstone will help to inhibit oil based stains but such spillages should be wiped up immediately. On rougher surfaced floors it may be prudent to use an appropriate surface sealer in conjunction with ‘Mattstone’. We have actually made a guide on how to seal grout for your shower. Ultimately most products methods will vary to a degree, especially depending on the type of grout sealer you go for. Generally, however, sealing grout consists of cleaning and drying the grout surface, applying the grout sealer and waiting for it to dry. Does tile grout need to be sealed? In more recent times the opening up of travel to warmer climes in the 70’s piqued our interest in the material. No self-respecting conservatory extension of the 80’s seemed complete without a floor of Spanish terracotta. Turn off under-floor heating. Test on an inconspicuous area first. Avoid using strong detergents to wash treated surfaces. On higher porosity materials, sufficient LTP Mattstone H20 should be applied wet-in-wet until treated surfaces are fully saturated. Do not use in temperatures under 5°C or over 25°C.