If you want better cooling for your M.2 NVMe SSD then there are some NVMe USB Enclosures available that come with a fan. Below you can find such NVMe to USB SSD enclosures. ineo Type-C M.2 SSD NVMe enclosure (C2605) Most of the modern-day laptops that come with an SSD have NVMe SSD in them. It is because NVMe drives are much smaller and can easily fit in laptops, especially the slim ones that are becoming more and more popular these days. Also, in laptops that come with both SSD and HDD, an NVMe SSD is the only practical solution because nowadays laptops are becoming slimmer and they do not have that much space to accommodate two 2.5-inch drives. In such laptops, NVMe SSD is the boot drive where the operating system is installed. In today’s era, buying a laptop without an SSD is the biggest mistake you can make because even if you have a good processor and enough RAM, a traditional mechanical hard drive (HDD) can make your laptop sluggish on modern operating systems like Windows 10. An SSD is much faster than a hard drive and can even bring an older dead slow laptop to life if you upgrade its hard drive to SSD, 2.5-inch SATA SSD in this case because most older laptops do not have M.2 slot with NVMe support.

Best NVMe USB Adapter Enclosures for Cloning Laptop NVMe SSD Best NVMe USB Adapter Enclosures for Cloning Laptop NVMe SSD

This will significantly reduce the cost and time needed for PCIe/NVMe SSD production in the factory, which will also accelerate the end-product’s time-to-market. JMicron believes that the market will always strive for extreme high-speed, low power consumption, thin and light solutions for external storage products. Buy ineo Type-C M.2 SSD NVMe enclosure (C2605) ineo Type-C M.2 SSD NVMe enclosure (C2598) [Great Cooling, Write Protect Switch, Premium Design & Quality]A branded M.2 Adapter and Enclosure that supports both NVMe and SATA solid-state drives up M.2 2280 form factors. It uses a USB Type-C connector at both ends, supports up to 10Gbps data transfer rate, and is Thunderbolt 3 compatible. The frame is made of ABS plastic and there is an aluminum heatsink that sits on the M.2 SSD and the frame. The installation of the M.2 SSD is 100% Tool-Free and you do not need to install any additional drivers as it is completely plug-n-play. A small blue LED is present that indicates the transfer rate, and also lets you know whether the device is operational or not. The build quality of the device is good and it is also very sleek & portable. It supports Windows 7 or higher / Mac OS 10.5 or higher / Linux operating systems. A perfect M.2 SSD enclosure that can be used for cloning NVMe or M.2 SATA solid state drives and can also be used as a fast portable external drive for traveling purposes because of its super-compact form factor.

Plugable USB C to M.2 NVMe Tool-free Enclosure USB C and

A popular NVMe USB Enclosure Adapter that supports M.2 NVMe solid state drives up to 2280 form factor. It is not compatible with M.2 PCIe AHCI SSDs and M.2 SATA SSDs. For connectivity, it comes with a USB 3.1 Type-C port and offers a high transmission speed of up to 10 Gbps. The body of the adapter is made of plastic and the shell is made of aluminum which helps in heat dissipation to some degree. The adapter has a tool-free design and both USB Type-A and USB Type-C male cables come included with it. The device is plug and play and supports a wide range of operating systems that include Windows 7/ 8/ 8.1/ 10/ Linux/ MAC / Android. Buy SSK M.2 NVME SSD USB Enclosure Adapter MOKiN M.2 NVME SSD USB Enclosure Adapter [Tool-free Design] JMS583 is a bridge chip that can turn a PCIe/NVMe product into an USB product. JMicron's embedded USB to NVMe data translation technology is able to create an external device to achieve more than 1000MB/s in performance. It is the industry's first chip to fully saturate the USB 3.1 Gen2 10Gbps bandwidth.The upcoming of next generation CF Express and SD Express ultra-high speed memory cards are also compatible with JMS583 which can become USB superspeed plus card readers or USB flash drives. The JMS583 has been in mass-production since April 2018. Buy ORICO M.2 NVMe SSD USB Enclosure ineo Type-C M.2 SSD NVMe enclosure (C2597) [Military Style Design, Rugged, Good Heat Dissipation, Write Protection Switch] The JMS583 has passed UBS-IF's extensive specification testing to become the industry's first USB-IF Logo Certified USB 3.1 Gen2 to PCIe/NVMe bridge IC (TID: 5,040,109,048). Well, everything is good with NVMe SSD but the problem arises when you want to replace your current NVMe drive with a new one without losing your data and operating system. The main reason for NVMe SSD replacement is when your NVMe drive is at the end of its life or you want to upgrade to a larger capacity NVMe SSD. Most of the laptops today, especially the mainstream ones come with only one M.2 slot which makes it impossible to clone the NVMe SSDs without using any external hardware. If you have a desktop with multiple M.2 slots then you can clone your laptop NVMe SSD to a new NVMe SSD but if you don’t have a desktop then you will need an external NVMe to USB Adapter or enclosure. Using an NVMe to USB Adapter, you can easily clone your laptop’s NVMe SSD to a new NVMe SSD using good drive cloning software. Moreover, these adapters can be very useful for your PC also if your motherboard has only one M.2 slot because you need a second one for cloning. There are tons of NVMe USB adapters available today, especially from the smaller brands and a few from more popular brands. So, to help you select the best NVMe to USB Adapters, I have selected some of the best NVMe adapters of different types and designs. Best NVMe USB Adapter Enclosures