Creality Ender-5 Plus PEI Magnetic Flexible Heated Bed, 3D Printer PEI Printing Plate 377X370X2mm

Product Information

Also, if you keep your home temp cool, bump the nozzle and print bed temp up a few degrees or you'll have issues with bed adhesion. My printer bed make loud screeching noises when moving up and down despite having greased the screws. Achieve intricate details and smooth finishes, bringing your designs to life with astonishing accuracy. imgtitle="creality ender="" 5="" plus="" 3d="" printer"="" alt="Creality Ender 5 Plus 3D Printer" src="https://www. I would also recommend going on thingiverse and printing all the "Strain Relief" models for the printer wire loom and hotbed.

When using a glass bed surface, the glass remains exactly flat (minus scratches and such) over time.However, with some low cost printers, such as mine (CR10 v1, which has the exact same dimensions as the v2, so this product fits it), the metal bed, being regularly heated, collapses slightly over time. It is not possible for us to draw any conclusions about you, and any data collected as a result will never be passed on to third parties. Not by much, but with fine engineering such as 3D printing, a few fractions of a millimeter are enough for the nozzle to be too high, relatively to the bed, and this can in turn cause problems. The intuitive touch screen control grants you easy access to all printer settings, simplifying the printing process. You really have to do your homework and learn things such as nozzle maintenance, E-Steps, PID tuning.

I like the finish you get on the side-down face of the glass sheet so while it’s not always possible I do consider it during setup. I did upgrade the firmware with the update from Kersey Fabrications that fixes the BL Touch automatic leveling process to make it sense the bed more squarely. Resume printing Function: Creality Ender-5 Plus 3D Printer resume printing while power-off, the motherboard is fully upgraded and supports continuous power failure, which effectively reduces model scrapping caused by power outages. The Ender-5 Plus is equipped with advanced features designed to enhance your printing experience and convenience.So is the guide I followed just putting in the calibrated build volume in the spot on cura for actual build plate size which is costing me more space than it needs to? However, this has to be done BEFORE installing this product, or you will only be able to mitigate the problem. Mine has some factory worker's fingerprints permanently embedded into the PEI sheet, where they were manually holding the plate. By accepting all cookies, you agree to our use of cookies to deliver and maintain our services and site, improve the quality of Reddit, personalize Reddit content and advertising, and measure the effectiveness of advertising.