If a darker colour is required, the furniture should be allowed to weather for several months or wiped down with methylated spirit prior to applying an oil-based furniture stain. One of the key issues with new softwood garden furniture is that it’s often untreated and made from light coloured timbers. However with heavy rain, the inner cushions can still become wet, so any excess water needs to be removed and the cushions dried to keep them as clean as possible. Ryan Schwarze, head of business at Luxury Rattan says, 'If you have an old piece of rattan furniture that is looking worse for wear, I would recommend using a soft cloth and rubbing some olive oil onto the product. If this isn’t an option, try placing the legs of your furniture on a dry surface – such as planks of wood – as this adds a protective barrier.

How to clean garden furniture to keep it looking new | Ideal Home

MRK Services are able to give your old and worn metal products a new lease of life through our blast cleaning services. For plastic furniture which is dirty but doesn’t have any stains, washing up liquid mixed with water is enough for a good clean. Step Four: Take the new replacement strand of rattan, that matches the colour of the line you are replacing, and weave it in and out of the gap left by the strand you have cut out. They are not suitable for wood that has been waxed, oiled or treated with products such as wood preservatives that contain wax, oil or silicon.It is important to keep garden furniture clean to ensure it stays looking in pristine condition for years to come. A homes journalist for two decades, she has a strong background in technology and appliances, and has a small portfolio of rental properties, so can offer advice to renters and rentees, alike. If your wooden cabinet, bed frame, or coffee table is looking dull, it's high time for a wood furniture restoration. If you have whole teak decks to do and don’t want the bright, freshly-sanded look, this is a useful solution.

Woodcare Products - Outdoor Wood Treatments | Cuprinol

We are looking to varnish about 20 wooden tables of 2, 2 tables of 4 and 3 tables of 6 sometime this month or early May. If there is any metal on your rattan furniture, you will have to pay special attention to these bits to ensure that they don't go rusty and are treated properly. Hold the glued end of the replacement strand against the supporting vertical strand and allow the glue to dry. First, use a handheld vacuum or brush attachment to remove loose dirt and a toothbrush can even be used for any nooks or crannies.Once the stripper has fully dissolved, it's time to neutralise the wood by applying a wax and polish remover or white spirit and leaving it to sit for 24 hours. Dries to a semi-translucent finish doesn’t mask the wood grain – adds deep colour to softwood and light tint to hardwood.