MAC ALLISTER FOLDING WORKSTATION. Ideal For Indoor and Outdoor Workshop Use

Product Information

This doesn’t seem to hurt its capabilities, though, because the carrying capacity is 180kg – only beaten by the test-winning Workmate. A workbench is an essential bit of kit for anyone who likes tinkering with their car or doing any other form of DIY. Unlike the others in the test, it doesn’t follow the ‘replica Workmate’ formula, instead using a mainly plastic construction and a clever folding mechanism.

mac allister folding table vs keter folding table | Talk mac allister folding table vs keter folding table | Talk

These are almost universally known by the name of the original – the Workmate – which was invented in the 1960s by a Ford and Lotus engineer. The “step” is useful for steadying the bench while sawing and can be used to work on taller parts, such as the top of a body panel. The clamps are low quality, interchangeable and the bench sizes seem the same but I've never actually measured them. The downside is that folding and unfolding the Clarke is a time-consuming business, with legs to be deployed and knobs to be tightened.A second, lower shelf also provides a handy place to put tools, rags or cans of WD-40 while tackling a job. It feels more stable, too, and its 120kg maximum capacity meant it was wobble-free even when loaded with our hefty wheel-and-tyre combination. It allows you to hold, hammer, paint and polish parts away from the car, providing a means to keep you and the components safe and secure. It also has a step so you can put a foot on it comfortably to steady the bench while using a saw, or can reach high up if working on a tall parts such as a bumper. A 120kg maximum load capacity isn’t the most generous, but it should be enough for most automotive tasks.

Keter Folding Work Bench | Toolstation Keter Folding Work Bench | Toolstation

When unfolded, the hinged legs allow for two working heights, meaning you can work on taller items without having to stand on your tip toes. Please refer to publicly filed documents with the Security Exchange Commission, which can also be found at https://investor. Once locked into the open position, there’s a substantial work surface, which can be supplemented with two detachable clamps that are supplied.Clarke’s bench has some useful features, including a choice of two working heights for the work surface and a substantial 150kg load capacity, which is enough for an entire engine or gearbox from a smaller car. If space is at a premium you’ll need to think about storage too, as the Minotaur’s switchable clamping jaws mean it is an awkward and lumpy shape once folded. These are less versatile, but the uncomplicated mechanism means it folds up smaller than the Minotaur for storage and weighs just 4. In addition to the conventional clamping action of the two plank-like work surfaces, they can also be individually tilted to 45 or 90 degrees. You’ll also find a workbench invaluable for clamping parts such as hoses and trim while they are being cut.

Mac Allister Parts | Partmaster Mac Allister Parts | Partmaster

Yet once built, the Silverline does most jobs reasonably well, with horizontal-only clamping planks. The stated maximum weight capacity is 100kg, but it felt wobbly even when we loaded it with a wheel and tyre. We didn’t try it with anything approaching that weight, but the bench felt perfectly stable with our wheel-and-tyre combination.stone is less than 100 kilogrammes in french, so while these benches will support a surprising amount spread out, they don't take point loads so well. This won't be my main workbench, just something portable, convenient, and easy to stash away when not in use.