Makita HR2630 26 mm 3 Mode SDS Plus Rotary Hammer Drill,Blue

Product Information

The maximum capacity in concrete is 80 mm with a diamond core bit, while steel has an maximum of 13 mm and wood 32 mm. The second mode is the hammer action, which is perfect if you’re going to use it for chiselling, and the third mode which is the rotary and hammer mode is ideal when you need to use both a rotary and a hammering(chiselling) action. Toolstop Limited is a credit broker, not a lender and is authorised and regulated by the Financial Conduct Authority (FRN 737231). The main difference between the HR2630 SDS Plus rotary hammer drill over its predecessor (HR2610) is a much-improved mode switch that lets you go from rotation to hammer mode and vice versa without the need to rotate the chuck.

Product dimensions are stated with a battery / batteries, if they affect the overall dimensions of the product. The Makita HR2630 has a super easy user interface in every dimension, including its SDS plus bit holder which is extremely easy to use. An introduction to hammers: Hammers combine a pulsing pressure action, or 'hammer blow', with the rotating of a bit to break through denser materials. The Makita HR2630 SDS + Drill is the updated version of the immensely popular previous model HR2610.

Holding it this way will give you a firmer control, and it’s far better dealing with the vibrations over to the front. So, if you’ve got an SDS plus bit, insert it, find the lock off point pushing your bit and you’re ready to go. And to remove the bits again nice and simple, pull back the collar, pull your bit out and that’s it. This system transfers the energy that the hammer builds up internally through to the tip of the drill bit without damaging the chuck.

So, if you’re looking for a hammer drill that can help you get more than one task done at a time, then all you need is Makita HR2630 hammer drill. The compact and lightweight design of this model makes it suited to a number of applications as well as overhead. In other words, if the user has got a chisel bit in the machine and he/she wants to be doing a certain amount of chiselling, they can put the chisel in the right angle and then lock it off back into hammer mode.Secondly, whether you require the smaller SDS plus shank size drill bit or the larger SDS max shank size. From the bottom part, it’s got an excellent soft rubberized grip on the handle with an intelligent trigger.

This set of tools will allow you to chisel through most surfaces without resistance, all with an ergonomic shape to help reduce the risk of injury when you use it on a semi regular basis. It is fitted with a torque limiter to ensure the user and drill are protected from mechanical and electrical overload that could cause injury. Model HR2630 is a 26mm (1") combination hammer based on predecessor model HR2610 but with improved operation mode change lever. The Makita HR2630 is also suitable for using with TCT or Diamond core drills up to 80mmwhen using the appropriate SDS+ adapter, when using for core drilling it must be used on the drilling mode only.Also, it has a handy side handle which can be loosened and put in whatever position you want; right-handed, left-handed or any position in 360 degrees that will be easy for you to tighten. Perhaps most impressive is the fact that these Makita SDS+ hammers can deliver 4,000 blows per minute.

Hand pain and fatigue is minimised thanks to the rubberised soft-grip handle which compliments the overall lightweight ergonomic design.Modified operation-mode change lever enables switch from 'Rotation' to 'Hammering' mode and vice-versa without rotating the chuck.