Gyproc Plasterboard Patches various sizes 12 Pack (2 x 50mm, 5 x 100mm & 5 x 150mm))

Product Information

These fast-setting fillers fix damage in plaster surfaces speedily – Gyproc EasiFill 20 is workable for 20 minutes and sets in approximately 30 minutes to get the job finished quickly. Safety Data Sheetsare important documents in the construction industry and assist in the continuing focus on occupational health and safety on and off sites. Gyprock Rapid Repair Kit is manufactured by CSR Gyprock in Australia to stringent product specifications. Just applying filler and hoping for the best rarely works because gravity just drags the filler downwards.

Some products may be delivered straight to your door from one of our suppliers and these products will be labelled within the product description. Now you need to measure and cut two noggins (horizontal wood that bridges the gap between the studs). The product itself is self-adhesive, but when fused with a rapid setting substance such as Gyproc Easi-Fill 20, it leads to a reliable quick-fix solution. To repair a hole in a hollow door, wall, or ceiling, firstly trim the edges of the hole and make is square.Artex Caulker (250mm ) helps to fill joints and create smooth finishes or any suitable jointing knife. Larger areas of missing corner can be repaired using a plastering corner bead which is fixed to the wall below the level of the existing plaster and then plastered (rather than filled) up to. Depending on the shape of the hole, whether its circular or has jagged edges you may need to use a padsaw, jabsaw or hobby knife. Another complication that springs to light when you have unfortunately made a hole in a plasterboard wall or hollow door is the void behind it due to the construction of the stud work used to hold the plasterboard up or provide the framework for the door meaning that you can’t just use filler as there is nothing to bond it to. Squeeze on some ‘instant grab’ around the edge of the board and then wind in a long screw to the centre of the repair piece.

The self-adhesive patches when combined with a rapid setting material like Gyproc Easi-Fill 20 provide a real quick-fix solution to what can be a time consuming and difficult way of repairing damaged plasterboard. Amazing Value - Our wall repair patches / ceiling repair kit comes in a great value 4 pack ideal for repairing different walls and ceilings in your home, with spares left.Houses built up until the end of World War II are likely to feature lath and plaster non-load-bearing/dividing interior walls and ceilings. It is sometimes skimmed with a couple of coats of plaster to give a uniform finish, or simply fixed in place and the joints taped and filled (known as dry-lining). You will need a putty knife – any size will do – and some jointing compound or filler suitable for plaster such as Everbuild All Purpose Ready Mixed Filler. If it’s a small screw hole or nail hole just use a putty knife and a suitable filler, and smooth out. As you will need to do a bit of cutting, before you start this, firstly run over the area around the hole with a wire detector to make sure there aren’t any wires, pipes or other items that you may accidentally cut through.