The information given in this product data sheet is given in good faith, based on current knowledge and experience. It relates only to the specific material designated and may not be valid for such material used in combination with any other materials or in any process. Such information is to the best of the company’s knowledge and belief, accurate as of the date indicated. When it comes to overall quality and value for money, anti mould paints don’t get much better than Ronseal. The product has a shelf life of 12 months from the date of manufacture, subject to correct storage conditions.

HQC Anti Mould Paint, Mould Resistant | High-Hide Stain

Seal new or bare surfaces with a thinned coat of “Kingfisher Classic Emulsion” (1 part water to 5 parts paint). Whilst not specifically labeled as anti mould, Dulux’s Easy Care Bathroom paint works much in the same way as some other paints on this list.

Thermapaint Anti‐Mould will cover most existing matt finish emulsions, but care should be exercised with some eggshell, silk and vinyl finish which are typically resistant to over‐painting. Such surfaces may be “keyed” with a power orbital sander or some may respond to priming with Kingfisher Floor and Wall Sealor Weatherflex Stabilising Solution Care should be taken when sanding any pre‐1960s wood or metal finishes as these may contain harmful lead. In terms of aesthetics, this anti condensation paint has a clean, white matt finish which in itself is a look worth keeping. Thermapaint Anti‐Mould is not a substitute for adequate ventilation and should not be used in areas where excessive or uncontrolled condensation is allowed to accumulate for long periods.

5 Best Anti Mould Paints UK (2023 Review) | Spruce Up! 5 Best Anti Mould Paints UK (2023 Review) | Spruce Up!

b) Wearing normal domestic rubber gloves (as you would when using bleach), sponge or wipe onto the affected area. Try to draw the sponge in a single sweep from the outer edge to the centre of the infected area and rinse in the dilute solution each time. This reduces the risk of spreading the spores. Leave for 3 to 4 hours or preferably overnight for full action to develop. In my professional opinion I would avoid purchasing budget anti mould paints. Adding biocides which will ultimately protect your surfaces from mould growth isn’t cheap. So chances are, a budget anti mould paint isn’t going to have a high content of biocides. Pre -treatment: It is essential to pre-treat infected areas with Kingfisher Mould Cure fungicidal wash. High quality and durable smooth matt emulsion paint that is ideal for interior walls and ceilings. Excellent opacity and is wipeable. Dries in 2-6 hours. Dulux Trade Mouldshield Fungicidal Matt contains a special fungicide which inhibits the growth of fungi and mould inside buildings. Its broad spectrum of antifungal activity makes it ideal for most interior walls and ceilings likely be disfigured by mould. Tested to BS 3900 Part G6.P102 Keep out of reach of children.P101 If medical advice is needed, have product container or label at hand. a) The “Mould Cure” bottle comes with a built–in measuring cup, remove the lid, hold upright and squeeze gently to measure out 25 ml four times (100ml) and add to 400ml of warm (Not hot or boiling) water. Thermapaint Anti-Mould is widely used by private landlords and social housing providers to treat persistent problem areas. It can be applied by roller or brush like any normal emulsion.