In either mode the radiator or tap icon will be displayed. How do I change from Automatic to Manual mode? The thermostat is not communicating with the receiver. Replace the batteries in the thermostat. Re-commission the 2 units.

However this auto-pairing process only lasts 2 minutes (to avoid issues of pairing with the wrong Digistat). If you find that the 2-minute auto-pairing period has expired, please follow the following process: This range of valves and actuators are now obsolete. Your only option is to drain down the system and fit ZA 5/6 zone valve.The Digistat is universal because it can be used as a fully-programmable thermostat or as a simple manual thermostat. In fact it contains 4 types of functionality: 7-day programming I have a Drayton TRV4 thermostatic valve on the radiator. Is it correct that it can be installed on both the Flow or Return and can be mounted either horizontal or vertical? I have a Digistat RF and I have managed to snap one of the clips on the battery holder. Where can I obtain a replacement

To swap between Heating and Hot Water on the thermostat press the setting button (cog symbol) to open this open. Reset the Digistat thermostat by going into the setting menu, selecting the Inst03 menu (installer settings) and then rSEt20 to reset to factory settings. Then remove the batteries. This option has no schedule and controls by temperature only. You set your preferred temperature and adjust it with the + and - buttons. When used with a gas boiler the Digistat will automatically cycle the boiler to help your boiler to run more efficiently and save you 10% on your heating bill (compared to a simple ON/OFF thermostat).When used with a Heat Pump the Digistat will protect the compressor by reducing cycling to 3 cycles per hour, to improve the life of the compressor. There are also known issues when pairing with Samsung smartphones using Android 11. Please change to an earlier or later version of Android.

In terms of compatibility, the Digistat+3RF can be used with a variety of heating systems, including gas, oil, and electric. It is also compatible with both combi boilers and zone valve systems. Such flexibility makes it suitable for a wide range of applications in various types of buildings. This groups weekdays and the weekend separately, so you can set a schedule for your weekdays and a separate schedule for the weekend. The Digistat remembers the last BOOST so if you always use the same parameters just press the O button once. Simple!

Digistat+3Si

day / 2-day programming:This groups weekdays and the weekend separately, so you can set a schedule for your weekdays and a separate schedule for the weekend. The Green Premium eco-mark stands for complete, transparent, and easily available information about products The Digistat qualifies as one of the additional measures required when replacing a boiler. In fact it qualifies both as a Smart Control and as Load Compensation. Which Digistats are being replaced? 2290B

What should be done when E1 appears on the screen of a room thermostat. Does the whole wireless system need replacement? Yes, there is a Digistat to suit both types of boiler – try our product selector to find the right one for you. If the valve is a 15, 10 or 8mm angled body then it can be fitted in either flow/return, horizontally or vertically. Manual thermosta:This option has no schedule and controls by temperature only. You set your preferred temperature and adjust it with the + and - buttons. When used with electric heating the Digistat cycles the heater at 12 cycles per hour to maintain room temperature and save money.

Product Supporting Documentation

The 15, 10 or 8mm angled body is bi directional as denoted by the double-headed arrow on the valve body. All other bodies are flow directional as indicated by the single headed arrow head on the valve body.