This means that the although the Perspex® colour allows transmission of a minimal amount of light you are unable to see through the material (eg if you held your hand up behind a translucent colour sheet you would see a shadow, but you would not be able to see your hand) PLEXIGLASS SHEET - Plexiglas® Acrylic Sheet Family courtesy of Arkema Group Inc., manufacturer of Plexiglas. Perspex® sheet is a tradename for acrylic sheet known throughout the world - just like Lucite® acrylic sheet. These products in clear only are suitable for outdoor use with respect to exposure to ultraviolet light, water, exposure or immersion in accordance with UL746C. Yes, plexiglass acrylic is very versatile and can in fact be cut by a glass cutter. Plexiglass is shatterproof and does not require a glass cutter, however it can in fact be used to cut plexiglass. How Do You Cut Curves In Plexiglass? Do not use: Window cleaning fluids, scouring compounds, gritty cloths, leaded or ethyl gasolines or solvents such as alcohol, acetone, carbon tetrachloride, etc.

Plexiglass is shatter-resistant and has 17 times the impact strength of glass but can be broken when enough force is applied. However, when plexiglass does break, it does not shatter into sharp pieces, like its glass counterpart. Does plexiglass come in colors?

How do you cut thin plexiglass by hand?

These products in all colors have been subjected to one or more of the following tests: ultraviolet light, water exposure or immersion in accordance with UL 746C, where the acceptability for outdoor use is to be determined by Underwriters Laboratories. Plexiglass can be cut by hand using a scoring knife or a Dremel tool. In both instances, you would use a marker or ruler to indicate where you intend to cut it. To cut the material with a scoring knife, you should make a small cut in the marked area. Then place the sheet on a table with the marked side facing up. Bend the acrylic over the edge to cut the acrylic sheet. For a Dremel, you should clamp the material down and slowly make the cut. Water will help ensure that the Dremel does not overheat and ruin the plastic. Sand the acrylic after for a smooth edge. More detailed instructions can be found here. How much does 1/4 inch plexiglass weigh? High-Quality Clear Perspex Sheet Cut to Size Browse our Perspex Acrylic Sheets | Cut to Size Perspex To remove tar, grease, paint, dried masking paper, etc., use a good grade of naphtha or kerosene. Users of these solvents should become familiar with their properties to handle them safely. Wash and clean as above. Compared to glass, these incredible sheets are much lighter in weight yet still just as strong – making them incredibly practical and user-friendly too. Clearly (no pun intended), there's nothing quite like the convenience and reliability of clear Perspex sheets. Our standard sheet sizes can be cut to size to suit your needs. Explore our range now or get a free quote for clear acrylic sheets to cut to size! Superior Clarity Clear Perspex Cut To Size Custom Cut For General Purpose Applications

This means that the Perspex® colour is see through. So in effect, the sheet is clear but tinted with a colour.One of the main advantages of acrylic is its transparency. It’s clearer than glass, which makes it a popular choice for applications where visibility is important, such as in windows and displays. Acrylic is also resistant to UV light, which makes it a good choice for outdoor use. Polishing - Apply a thin, even coat of a good grade of automobile paste wax (not a cleaner-wax combination) with a soft clean cloth to protect the surface of the Plexiglas® sheet and maintain its luster. Buff lightly with a clean cotton flannel or jersey cloth. After polishing, wipe with a clean damp cloth to ground any electro-static charges which may attract dust particles. Plexiglas® Clear-Edge Frosted is sold in standard widths of 48", 51", 60", 63", 72" and 75" and standard lengths of 96" and 100". Clear Perspex sheets are our most popular product online since it is one of the most cost-effective and functional plastic sheeting. If you have a clear acrylic sheet to cut to size, we can help!