obviously i dont want to do anything stupid and obviously it needs to be legit as the house is not even 6 months old yet Assuming it will be connected to a lighting circuit, not a ring main, then a lighting circuit is designed to handle 6 amps, not 32 amps your ring main is designed to handle. What you should do is run a 2.5mm T&E cable from the distribution board. But that's easier said than done. got a george foreman grill thingy, but i want to put an inline switch on it (like a lamp switch) the only way to turn the grill on and off is on the mains where the plug goes... - is it possible to fit a switch half-way down the cable to enable me to use that to turn it on and off?? if so, anyone know what they are called, and where from?? There are holes or “blinds” where holes can easily be made, so that the cable can enter the box (see grommets below). They come in a range of depths, so it is important to ensure that when changing a face plate that the new one will fit. The width will be determined by the number of gangs or plugs that can be plugged in at once. Face Plate

In Line Lamp Switches | Wiring Accessories | CEF

it doesn't matter, i am just gona not have the foreman on the side, gona put it away, and just use it when we wanna use it...!! Pattress – This is the box that contains the parts of the light switch. Make sure that you get the right size face plate to fit on the pattress that you have fitted Edited by cjs on Wednesday 14th December 12:29actually why didnt i think of that totally forgot that there was the distribution unit up there !! strange as i was playing with it last night aswell. This is the metal strip that connects the earth terminal and therefore earth wire to the face plate screws. Terminals This will either sit inside the wall, in the plaster or cut into the plaster board, or be mounted on top of the surface of the wall. Plastic tends to be used if the pattress is surface-mounted and metal when it is incorporated in the wall.

Terminals – These provide the entry points for the wires to be connected to either side of the switch. The switch will interrupt the flow of electricity through the live (Brown sheathed) wire. CarGurus UK Limited, c/o Legalinx Limited, 3rd Floor, 207 Regent St, London W1B 3HH, United Kingdom

Switches | Electric Switches | Screwfix

It is designed to protect the cable from becoming damaged by the box, and the cable should also be tight fit so that if there is a fire in the box it will not spread easily. Cable Haven't you realised that gender discrimination is not allowed any more? Good heavens the next thing you'll be asking is their sexual orientation or, heaven help us, their ethniticity. One was told the signal was beamed to her set top box without wires then we turned up drilling holes in wall to wire in cable tv she wasn't too pleased

This is the uPVC sheath containing the electrical wires, Live, Neutral and Earth. Previously the sheath was made of rubber and these cable should be changed by a qualified electrician – find one near you here. Live As we are dealing with electricity it is obligatory that we warn you about safety. We have a great project that helps you understand what you are allowed to do, what you cannot do and what are your obligations under the Building Regulations (Part P); Find out more about the electrical do’s and don’ts here. that georgie has a heating element and needs to be earthed im sure someone will disagree with what ive put Face plates have the terminals fixed to it which are usually screwed. The live and neutral are 22mm apart. To prevent something accidentally being inserted into the live parts of the plug, there are shutters (UK plugs) which only open if the top, earth ping is inserted. It will be connected to the face plate screws so that they are earthed and will not carry a current. Bridge

13A Switched Fused Spur White - Screwfix

actually why didnt i think of that totally forgot that there was the distribution unit up there !! strange as i was playing with it last night aswell. On one occasion we asked woman costumer where she wanted us to drill entry point to bring in services she bent over and said can I have my hole here