ALPENFOHN 84000000156 Ventirad for PC

Product Information

While that won’t be an issue for most builds, the C7 RGB is perfect for compact small form factor cases with less than two inches of CPU cooler clearance. If you’re building in one of those, the Wraith Stealth’s 2.12-inch height puts it out of contention; that’s where the C7 RGB comes in.

One part of the industry that requires millimeter precision is building systems for small form factor designs – being able to take advantage of every small bit of volume inside a chassis but also maximize performance yet minimize noise is a critical element to the success of these systems. ID-Cooling has thrown another hat into the ring when it comes to cooling the processor, something that can be a tough job in such an enclosed space. The new IS-47K is designed with a maximum height of 47mm, and is apparently rated for CPUs up to 130 W. Cryorig’s C7 RGB is one of the few compelling aftermarket low-profile CPU coolers with RGB, so it’s worth a look if you want some visual flair for your small form factor PC. But it’s more than just style over substance, as the C7 RGB is also an adequate performer adequate for most low-powered builds. Der verbaute 92x92x15mm PWM Lüfter besitzt einen 4-Pin Anschluss und kann daher über das Mainboard gesteuert werden. Dies ermöglicht eine Drehzahlanpassung zwischen 800 und 2.800 U/Min, womit minimal 14 dB(A) und maximal 80,03 m³/h möglich sind. The PCIe expansion slot is covered by the endings of the heatpipes, this is avoided by many users by using a PCIe riser cable, a common thing to do within the SFF community.I just received a Dan A4 case today and I wonder which way I should go to cool the CPU. I havent bought any CPU or other components by now. I probably go for an AMD Ryzen 3600, 3700X or a similar Zen 3 chip. Originally I considered the Asetek 645LT. But a lot of unhappy reports (especially from users without custom cables or gurgling noises) let me rethink my solution. In my opinion there are 2 good solutions for air cooling the CPU in the A4: If your cooler’s rated TDP is higher than your CPU’s TDP, the combination should work on paper. However, this is problematic because most (if not all) CPUs run hotter and use more power than their TDPs might suggest. So a “95-watt” TDP CPU might actually put out 150 watts or more at full load. The NH-L12S takes the general design of low-profile CPU coolers like the NH-L9 but adds some much-needed room between the heatsink fans and the cold plate. This provides more room for airflow and helps bring temperatures down. It still can’t compete with a proper tower cooler, but the performance is noticeably better than sub-two-inch coolers. Das im Lieferumfang enthaltene Schraubmontagesystem wurde so konstruiert, dass eine maximale Kompatibilität auf mini-ITX Mainboards gewährleistet wird.

The best air cooler for the Dan Case and maybe one of the best slim coolers overall by Joseph Rasero Coming in at 1.45 inches tall, the NH-L9 CPU coolers will fit almost anywhere, even in some of the smallest Mini-ITX cases available. This effortless compatibility makes them an easy default choice for the majority of SFF builders. Of course, the great performance for the size helps too. Alpenföhn have further innovated by attaching a 92-millimeter fan to the base of a high quality heatsink and in so doing have cut the overall height of the cooler to just 47 millimetres. This extraordinary design also has the added benefit of reducing fan noise. A Premium Heatsink made from high quality MaterialsDurch den intelligenten Einsatz der Materialien und einem komplexen Lamellendesign wird der perfekte Spagat zwischen Leistung und Kompatibilität geschaffen. Zudem eignet sich der Kühler mit seinen maximal 47mm Höhe ideal für den Einsatz in Gehäusen von DAN Cases. Best Value Low-Profile CPU Cooler: ID-Cooling IS-40X performs well and should cool most low- to mid-power CPUs at an excellent price. The other benefit of this design is that RAM modules of up to 33 mm in height will not impede the cooler. Additionally if VLP-RAM (Very Low Profile) is used a 120 mm fan can be mounted to the cooler rather than the standard 92mm fan. The built-in 92x92x15mm PWM fan has a 4-pin PWM connector and can be controlled via the motherboard. This allows a speed adjustment between 800 and 2800 rpm, allowing a minimum of 14 dB(A) and a maximum of 80.03 m³/h. For both solutions I‘m planning to install two noctua case fans as exhaust at the bottom of the case.