Hakko FX951 Professional Thermally Controlled Soldering Station & Soldering Iron with Tip Set Kit – Compact 75W High Power - Interchangeable Composite Tips – 91 Varieties (5 Included) - UK Plug

Product Information

Powerful thermal recovery allows soldering at lower temperature settings. Line-up includes 85 types of standard soldering tips. Thermal Recovery Graph The included chisel tip also provides a precise and clean solder joint, making it perfect for delicate projects such as circuit board repair. Are Weller and Hakko tips interchangeable?

Build quality is excellent, as we have come to expect from Hakko. The transformer, the heart of the soldering station, has the size and weight needed to perform up to spec. The station is ESD safe and can be used continuously without taking breaks throughout the day. With proper care, the transformer unit will last for decades. The iron and tips wear considerably faster. Specially designed handle and tip provide improved workability when mounting minute, high-density electronic components.*Can also be used with the following stations: Thermal capacity is more than adequate for general-purpose soldering. The limits of this soldering station lie exactly where you’d expect them to be judged solely by the transformer’s 75 Watt power output. Only parts with high thermal capacity give this iron trouble. Small joints are ready for soldering in under a second.

It is actually both, you preset the temperature, then can see the temp climb as the tip heats up, and it holds very accurately at the set temp. There are several modes it can display and it tells you when sleep mode is active as well. Does Hakko FX-951 come with the wire for the sleep mode function? A traditional soldering iron takes from 5 to 10 minutes to heat up to a temperature sufficient for reliable melting of the solder and soldering.

The iron is the most compelling reason to choose the FX-951 over other mid-market soldering stations. The wand is one of the smallest and lightest on the market. From a purely mechanical point of view, this soldering iron is one of the easiest to handle in the industry. Hakko offers a wide variety of tips for use with the FX-951. Due to their size, the tips are 1.5 to 2 times more expensive than the tips used on entry-level soldering stations. The iron is compatible with Hakko’s professional soldering station, the FM-203, should you choose to upgrade in the future. Performance Hakko is a Japanese company that was founded in 1944. It’s difficult to determine which Hakko soldering station is the best as it depends on individual needs and preferences. Some popular models include the FX-951, FX-100, and FR-300. What soldering stations use Hakko tips? T15 tips are used with the FM2027 and FM2028 Soldering irons used with stations FX951, FX952, FM203, FM204 and FM206. The T15 Series includes almost 100 varieties of tip shape and size covering any soldering or rework application. They are organised into groups by “shape”: Recovery time between joints is excellent on small parts. You can move from joint to joint without noticing a drop in performance. Every joint will heat up as fast as the one before.

Improve solderability and wettability with the HAKKO N 2system. *Requires a variety of equipment in addition to the N 2soldering iron. Forget switching the unit from the factory default Fahrenheit to Celsius without the aid of the manual. The process involves holding buttons while turning the unit on. Configuring the sleep mode is even more insane. The Pace and JBC are very close in power. While the Metcal is lower (80W on paper), due to heating efficiency I'll give it the benefit of the doubt and call it equal to the others. Under normal soldering these stations aren't going to see anywhere near their peak power output for any length of time. The control panel is needlessly complicated. Simply changing the temperature requires three buttons to accomplish. The * button selects the digit to change and the Up and Down buttons move it. The # button is used to set the temperature offset based on the thermal capacity of the tip mounted in the iron. The FX-951 is very much defined by its iron, the FM-2027. Getting heat where it needs to go has never been this easy. The small wand almost feels like an extension of your hand. The power cable barely weighs it down. Few irons in the industry can match the handling of Hakko’s latest iron. This is one of the best irons for soldering small parts you can find on the market.

The iron holder that comes with the kit is made out of painted metal. A yellow ceramic insert secures the iron without the possibility of anything melting or catching fire. A switch built into the holder puts the soldering station into sleep mode when the iron is positioned in the cradle. This reduces energy consumption and improves tip life at the expense of having to wait for the iron to heat up after taking a break. Knife Shape for line, face and point soldering. It is used for soldering at narrow pitches, correction of bridging and drag soldering. Power - Pace 120W (single channel), JBC 130W (single channel), Metcal 125W (80W into single channel). Another option is to use a brass wire tip cleaner, which can be gently rubbed on the tip of the iron to remove any buildup. The original soldering iron is made in Japan. The fake ones are made in China. Is there a complete manual for this device?

List of Search Results

The FX-951 is not a particularly powerful soldering station. Rated at 75 Watts it is just barely more powerful than Hakko’s own entry-level station, the FX-888D. All of it adds up to the good, but ultimately mediocre performance. It takes the unit ~20 seconds to reach 350 degrees Celsius from a cold start. Recovery from sleep mode takes 5-10 seconds depending on how much time the iron had to cool. Accuracy - Pace is the most temperature accurate station with minimal overshoot and no calibration. Metcal has no overshoot, no calibration, but tips have wide inherent tolerances. JBC has good accuracy but on the maximum performance profile overshoots.