Joined in 2023 
82 
63 About this deal
For a PoE to USB-C solution with power + data, please see our GAT-USBC-PD or GAT- USBC-PD-REV2. The Rev2 is compatible with the iPad Pro Gen3, Microsoft Surface Go, Samsung Galaxy Tab Active, and Google Pixel phones. Our Rev1 will work with Microsoft Surface Go and Samsung Galaxy Tab Active. Although the cable is short, it has a thumbscrew on one end to keep it inserted into the Microchip device and an indicator light on the connector at the other end to show an active power connection.
Does this device also act as an USB-Network-Interface so the device can be supplied with power _and_ network data over USB-C? If not, do you offer a version which does?What else needed - You need an IEEE 802.3af compliant PoE switch or injector to serve as the PSE (Power Source Equipment) and an Ethernet cable with PoE signal to feed the splitter. The Microchip PoE to USB-C® adapter connects IoT devices with a USB-C connector to Power over Ethernet (PoE) networks, enabling users to leverage theadvantages of PoE and USB-C technologies. The PD-USB-DP60 is a PoE to USB-C adapter that provides both power and datato USB-C hosts and power to USB-C Powered I also tested the Microchip device on an HP ENVY laptop running Windows 10. For reference, the HP laptop comes with a 65W power supply. As with the Dell running Windows 10, although the green LED on the USB-C cable lit up (indicating a power connection), the laptop stayed on battery power.
Does the RJ45 output also have POE power? I'm looking to power both a Nest IQ and a smaller POE camera at the same time.This change of mind return policy is in addition to, and does not affect your rights under the Australian Consumer Law including any rights you may have in respect of faulty items. To return faulty items see our Returning Faulty Items policy. Connect to USB-C PD Enabled Devices like iPad Mini 6, iPad Air, Samsung Tab S7 Lite, and more with both power and data. This rugged, affordable device converts normal, IEEE 802.3af PoE into USB-C power delivery (PD) and data with an integrated USB-C right angle cable. No accessories to buy, this device fits into almost any tablet enclosure and works with any PoE switch. I tested the device on a Dell XPS 15 7590 laptop running Debian with the KDE Plasma desktop. The screenshots show that the Microchip device provides both power and network connectivity.
Yes, the AF-USBC-PD is rated for 802.3af POE input (44-56V). It can be used with any 802.3af/at POE switch or injector. Yes, according to the specs, the Pi 4 v1.2 is compatible with the 5V3A profile of the GAT-USBC-REV2. The adapter is compatible with USB 2.0 and 3.1 and automatically provides the exact amount of power to theend device. It’s also plug and play, so no configuration is needed.As my TP-LINK switch only provides a maximum of 30W per port, which is less than the Dell needs to maintain full battery charge, a warning message is seen. Have you tested this with POE switches from Cisco (802.3.at supported) to power Nest IQ Outdoor cameras? In addition, it enables the use of PoE in applications not previously possible thanks to the capability of converting 90-W input to 60-W output. The adapter can be paired with Microchip’s single-port and multi-port (up to 24) PoE injectors/midspans and switches that comply with IEEE 802.3af/at/bt industry standards and provide up to 90-W power per port. If a lower power is needed to power the USB-C device, IEEE802.3af (15.4 W) or IEEE802.3at (30 W) PoE sources can be used, said Microchip. Why PoE to USB-C – A cost-effective way to add plug-and-play PoE support to 5V USB-C powered devices and make full use of PoE switches, or for a Raspberry Pi 4 setup where a PoE HAT is not applicable
Power-over-Ethernet ("PoE") is a networking feature defined by the IEEE 802.3af, 802.3at and 802.3bt standards. PoE lets Ethernet cables supply power to network devices over the existing data connection. The Raspberry Pi Foundation released a second version of the Pi 4 ("Rev 1.2") which fixed the problem. To find out if your Raspberry Pi 4 is Rev 1.2 or later (and will therefore work with the Microchip PoE-USB-C adapter), load the Terminal and type " cat /proc/cpuinfo". Press Enter and at the bottom of the screen it will show your Raspberry Pi model details including Revision number.After more than 7 months of research and development by the engineers of the Procet R&D Department, the Procet PoE to USB-C series adapters are finally available! Let's look into their details now.
Great Deal 
New Comment