STIHL Resin Solvent, for Hedge Trimmer Blades & Chainsaws

Product Information

Lubricate the blades with Stihl Multispray, this professional spray leaves a protective film that does not harden. The penetrating oil works to remove rust and protect against corrosion. If your hedge trimmer needs maintenance, our range of Stihl service kits and cleaning agents will help get your trimmer running smoothly. Related Articles

Store your HLA 56 in a clean and dry area and keep out of the reach of children at all times. The shaft and blade on the HLA 56 can also be easily separated, without tools, for compact storage or transport. Regularly looking after your hedges by keeping them tidy is essential for creating an aesthetically pleasing landscape. After you’ve used your hedge trimmer for the last time, empty its fuel tank in a well-ventilated place and dispose of the fuel in an environmentally friendly manner A: Yes, all of the tools in the AK Cordless System use the same style of battery. There are three different batteries in the range, which all have different capacities. For the HLA 56, we recommend the AK 20 battery which will mean the tool is perfectly balanced, but you can use the AK 10 and AK 30 battery in this tool.Prime the carburettor several times and pull the starter cord to run the engine before spraying carburettor cleaner fluid into the intake port. The carburettor will drag the cleaning fluid throughout the fuel ports to help clean them effectively. To prevent unhealthy growth and form a shape for your hedge, you should prune your hedges at an early stage. When pruning, ensure that you taper your hedge so it is wider at the bottom, allowing sunlight to reach all areas of the hedge. So far the string trimmer seems good.. for light to medium duty.... in other words on grass and weeds.. not so great on woody stuff. Which is fine I have a 2-cycle craftsman with a blade on it for heavy stuff. You will get a straighter cut on your hedges, if you move the hedge trimmer in an upwards motion when trimming. WD40 is a household favourite for lubricating, it isn’t the ideal oil for hedgetrimmer blades. It does not deter resin build up and can be harmful to plants.

Is your hedge trimmer no longer as effective as it used to be? This is not uncommon: frequent use blunts the cutter blades, so they need sharpening from time to time. It is possible that there is another reason for issues your trimmer may be having. If you notice your hedge trimmer running poorly or find it difficult to start up, you may need to clean your carburettor. You may also need to clean your carburettor if your hedge trimmer starts stalling whenever you use it. When sharpening your hedge trimmer, try to use the file at the recommended sharpening angle, which is detailed under Technical Data in the operating instructions for your tool.

A standard-length hedge trimmer with double-sided blades is perfect for cutting medium-sized hedges, as you can use upward and downward strokes to save time. When trimming the top of your hedge, hold the trimmer at a slight horizontal angle to ensure a smooth and level cut. Cutting tall hedges Once you have completed these steps, you can reassemble the hedge trimmer, ensuring you reconnect any electrical or fuel connections to make the hedge trimmer run smoothly.

Ideally clean and lubricate your hedge cutter blades after every use and we highly advise you lubricate the blades before storing the hedge trimmer for any length of time. For more expert advice on any of the products available for Firstly, you should remove and clean the air filter, as this allows you to access the carburettor easily.

More hedge trimmer tips

Charger for the STIHL AK Cordless System. With operating mode indicator (LED) and cable tie with Velcro tape. The charger can be wall mounted if required. Don't use a damp or wet battery in your HLA 56 and avoid using them in extreme temperatures (very hot or very cold). To find out more about looking after your battery, read our blog post.

Be careful when handling the hedgetrimmer blades and we advise you wear protective gloves and goggles when using any cleaning products. A: The recommended AK 20 battery will last up to 100 minutes or enough time to trim up to 380m² of hedges. This does depend on what is being cut and how the tool is being used. You can charge the lithium-ion battery at any time regardless of its charge level.Store the battery with a charge level of 40 to 60% (2 illuminated green LEDs), separate from the charger You should always be careful not to remove too much material during sharpening: the abrasion limit is 5 mm. If you file off more than this, the material strength may be compromised, rendering your hedge trimmer unusable. Wipe the blades down using a cloth soaked in soapy water and gently remove any sap and dirt. Dry the blades thoroughly using a clean cloth before lubricating.

Videos You May Like

Remove the carburettor cover and spray a substantial amount of carburettor cleaner fluid into the intake port before activating the throttle level to allow the fluid to clean the full mechanism. Closing and opening the choke will also help to clean all the choke valves. I trimmed some shrubs with the hedge trimmer.. which I mostly got for trail use on the farm.. and some hedges at relatives houses that I help out on. Firstly, using a sweeping arc-shaped movement, you should vertically trim the side of the hedge. Cutting along the edge of the hedge while walking forward will ensure you get a clean cut. Using your whetstone, work along each cutting edge to smooth out any burrs that may have formed on the blades. Smoothing out the cutting edges of your hedge trimmer will ensure a clean cut when trimming trees and branches.