APP Remote Control】: Easy to link your smart lights to Wifi Router and operate the smart under cabinet led lighting fixture by SmartLife App. Adjust the color temperature from 2700K to 6500K very soft white to daylight like hue white ambiance lighting system. Dimming the brightness from 0-100% . Group multi under cabinet lighting system and synch them as one group. Please user routers from the brands such as ASUS, Netgear, TP-Link etc (routers provided by telecom operators with poor compatibility due to the need to accommodate some telecom operator functions and can not add the smart devices) For Bluetooth products: Need to enable the Bluetooth and App location permission. Wi-Fi and Bluetooth dual-mode device can be searched by Bluetooth so you need to enable the mobile phone and Smart Life App use Bluetooth permission.(CabiSmart CW is both for Wi-Fi and Bluetooth) Some mobile phone systems mistake the device's hotspot network as an insecure network, and therefore cannot connect.You need to set it in the phone settings before you can connect.

You need to prepare two mobile phones, one mobile phone to open the hotspot as a network provider (instead of a router), the other mobile phone can be used to connect the device.(Recommend). If you use Add Manually to add the device to the Smart Life App please following the steps below for troubleshooting.

Please confirm that your router is a Wi-Fi 5 router or turn off the Wi-Fi6/802.11 ax mode of the 2.4G Wi-Fi in the Wi-Fi 6 router. Our device can not be connected to Wi-Fi 6 standard Wi-Fi.

Wide Application 】Mountable , linkable, dimmable, tunable, expandable smart lighting system. widely used as under counter lighting , shelf lighting, closet lighting, over cabinet lighting, kitchen cabinet lights showcase or book shelf lighting etc. If you still cannot connect and operate the device through the above methods, it may be a hardware problem. Using a mixed network of 5GHz and 2.4GHz, or a 2.4GHz network, if the connected network is only 5GHz, it cannot be connected. As the Android mobile phone system considers Bluetooth broadcast to have a positioning function, so it must authorize the positioning permission before scanning for Bluetooth devices. Therefore,only after you turn on the location permission of our App in the phone permission settings,then you can scan the Bluetooth device normally, so that you can correctly add the Bluetooth device to our App.You can verify whether it is a network problem or a product hardware problem in the following ways: If you still cannot connect and operate the device through the above methods,it may be a hardware problem. If you your device is among the above types but still can not be searched please confirm whether your device is under pairing mode (Press EZ button and the lights blinking rapidly) or you can try to add it manually. If you use auto scan search network feature and can not search your device by App. For Wi-Fi products App location permission should be enabled, and smart phone need to be connected to the Wi-Fi. CabiSmart CW is both for Wi-Fi and Bluetooth. Energy Saving and Super Bright：This 12w 960lm under cupboard lighting, each 4W LED light bar, equivalent to a 40W incandescent bulb, saving over 85% of electric power. The whole set is 4x3=12W, 320x3=960lm, super bright for your home and commercial lighting.

If your smart phone is IOS 14 or above please confirm that the local network permission and wireless date permission for the Smart Life APP were enabled.Whether the distance between the Bluetooth gateway and the Bluetooth device is moderate (less than 3 meters or 10 ft ),it is recommended to be as close as possible (if there is no Bluetooth gateway, you can skip it, just connect to the phone directly). Ensure that you are connected the correct Wi-Fi hotspot (the hotspot name of the device usually starts with SmartLife-XXXX). Energy Saving and Super Bright：This Warm White 12w 960lm under cupboard lighting, each 4W LED light bar, equivalent to a 40W incandescent bulb, saving over 85% of electric power. The whole set is 4x3=12W, 320x3=960lm, super bright for your home and commercial lighting. Energy Saving & Widely Applications:This ultra slim and bright under cabinet lighting kit is with 12W 960lm, each light equals to a 20W incandescent bulb, which helps to save over 90% electric bill. Perfect for your display cabinet, cupboard, wardrobe, closet, under counters, work bench, bookcase, shelf, utility rooms, campervan, caravan etc.

Your phone must be connected to the network,when paring a Bluetooth device,(because the Bluetooth device needs to be registered on the cloud server to be added successfully). Pairing a Bluetooth device needs to be added in our App, not the Bluetooth adding interface of the phone. If you can connect and operate the device through the above methods, it means that there is a problem with your router settings, or the router compatibility is not good. If the network is normal but the device fails to connect please confirm whether the router is overloaded. You can try turning off the Wi-Fi function of a device to free up channels for reconfiguration.Energy Saving and Super Bright：This Natural White 12w 960lm under cupboard lighting, each 4W LED light bar, equivalent to a 40W incandescent bulb, saving over 85% of electric power. The whole set is 4x3=12W, 320x3=960lm, super bright for your home and commercial lighting. If your device is a Wi-Fi device please add your device manually , and “ Add Automatically” may not discover your device. Dimmable and Memory Function：This LED lighting kit allows you to dim the lights down to 10% or ramp them up to 100%. No remote or APP needed. And the memory function of this under cupboard lighting keeps the previous brightness setting every time, only takes a few minutes to add beautiful light to your home. Unless otherwise specified,the devices only support 2.4GHz Wi-Fi. There is a possibility that the 2.4GHz and 5GHz mixed network will not be successfully configured, so please ensure that the Wi-Fi connected to the mobile phone is 2.4GHz.