Can I use this to glue in an aluminium insert that has come loose on my carbon bike frame? I am looking for a suitable adhesive to use, if this filler is not suitable can you advise of something else please? I am thinking of something like a two part epoxy glue. Remove the masking tape and sand down the damage at the front to make the area a little low and create a rough surface for bonding. Apply bonding liquid if supplied. Use either 3M™ Flexible Plastic Filler for plastic-like performance and excellent sanding and feather-edging, or use 3M™ Plastic Filler. Clean the damaged area with a soft cloth (i.e. 3M™ Professional Panel Wipe and a suitable degreaser). The filler is supplied complete with the necessary fast epoxy hardener which will cure the filler in around 2hrs.Apply adhesive. Apply it sparingly to one surface and press the parts together immediately. Hold in place until the bond sets. Do not reposition parts. Prepare surfaces. Surfaces should be close fitting (pre-fit before joining), free of residue, and dry. Slightly roughen smooth surfaces to improve results. Epoxy is sensitive to low temperatures so we would not attempt to try and cure the resin at very low temperatures such as below 15 °:C. At those temperatures, the cure time will be lengthened considerably.

Immediately fold the sheet and shape adhesive with fingers. Force adhesive into the drilled holes. Do not press too hard to keep a 3 to 5 mm layer of adhesive material on both side of the tab. To finish the repair and prepare for the primer, the use of a Plastic Filler Product is recommended. Rigid PVC strips are manufactured from a different material to our flexible plastic strips and we encourage you to request samples if you are unsure which material to choose. To finish the plastic bumper repair and prepare for the primer, the use of a plastic filler product is recommended. Use either 3M™ Flexible Plastic Filler for plastic-like performance and excellent sanding and feather-edging, or use 3M™ Plastic Filler.Clean the area inside and outside using 3M™ VHB™ Surface Cleaner or 3M™ General purpose Adhesive Cleaner applied with a 3M™ Professional Panel Wipe.