Clean and Cool: The 5000D AIRFLOW makes a stunning, showpiece-worthy PC easy to build, and even easier to For as long as I can remember, I've had love of all things tech, spurred on, in part, by a love of gaming. I began working on computers owned by immediate family members and relatives when I was around 10 years old. I've always sought to learn as much as possible about anything PC, leading to a well-rounded grasp on all things tech today. In my role at PCMag, I greatly enjoy the opportunity to share what I know. However, I wasn’t happy with this result. It’s a disappointing improvement especially considering the increase in noise levels, so I removed the shroud on the inside. This helped reduce noise by another dB and added more airflow, dropping the temperatures a further 2 degrees – and it’s this configuration that makes most sense. Adding fans can almost double the price of this case if you fill all slots with matching RGB fans to get good cooling results. Maximum Cooling Potential: A spacious interior fits up to 10x 120mm or 4x 140mm cooling fans, along with

Corsair iCue 5000X RGB - Review 2021 - PCMag UK Corsair iCue 5000X RGB - Review 2021 - PCMag UK

Any good PC case should have an attractive design that doesn't interfere with the building process or proper airflow. By that definition, the Corsair iCUE 5000X RGB is a success. It's a case for enthusiasts for sure and one with plenty of opportunities to realize an intricate custom build. It might not have quite as good of airflow as the Corsair 5000D Airflow (I mean, it's right in the name), but anyone who wants to go all-in with tempered glass should find that it's suited to their needs. And that's not to say the 5000X is stuffy — it was able to move air through without trouble, keeping temperatures right where they should be.Two Included 120mm Fans: CORSAIR AirGuide fans utilize anti-vortex vanes to concentrate airflow and

Corsair 5000X Case Review: a Majestic Tower of Glass Opulence

While idling, HWinfo64 measured an exceedingly breezy average of 28C over 8 hours. In Minecraft, the temperature only jumps up to around 40C. It’s not hard to imagine that the mesh coverings and large openings on the front and top greatly aid in these results. It’s safe to say that the case does its job quite well right out of the box, with a relatively cheap air cooler to boot, and the cooling can only get better from there with plenty of room to add fans or radiators.

The Design: Bring on the Bling!

With the drive cage in its starting position in the middle of the case, however, adding a power supply is nearly impossible. For this build, I used SilverStone's fully modular ST75F-PT power supply, and ran into trouble almost immediately. Without moving the cage, I could fit the power supply without any cables attached to it into position, but the space between the PSU and cage was too cramped for me to then add cables to the PSU. As mentioned, I took advantage of the open side radiator mount and vertical cable shroud to run some of the bulkier cables down to the PSU. If you're working with a build with a side radiator (which requires you to remove the vertical shroud), you will have to spend some extra time on getting everything laid out properly. One other thing to note is that the powder coat on some of the steel parts is rather delicate. I scratched a couple of areas with what I don't think was excessive force. When building, take care to keep your finish intact.

CORSAIR Gaming PC Cases - iCUE RGB Cases | CORSAIR

It’s now time to get to one of the most impressive aspects of this case. That thing I went on about in the first paragraph. The Corsair iCue 5000x hits its stride where many tempered glass cases fall short, because it manages to blend sleek looks with function. Corsair uses angles to channel the air around the glass front panel and to the fans, with the same design providing heat removal via the roof vent. Usually, intakes are far too restricted to provide the necessary volumes of air needed to cool components properly. I thought that would be the case for the front and top panels, but I actually didn’t see any temperature differences when testing my system under full load with the panels off. Corsair clearly spent a lot of time testing the spacing here to get almost identical results to the Airflow D version of this case. AIO i believe comes with ML120 fans and will be fitted to the roof. So if you buy an extra 5, they will be fitted most likely... 1 rear exhaust, 1 more on roof and 3 on the side. Is it really too difficult to design the bottom of the case so the bottom filter slides out from the front of the case? Fractal Design have been doing it that way for years. I've added a Corsair H100i CPU cooler - where does this sit? at the top? Does this take up the top 3 fan spaces?For the old case, we found that the CPU idled at 32 C while the GPU was at 27 C. Under load, we observed the CPU move between 52-72 degrees on average with a maximum temperature of 81 C. The GPU performed between 47-55 C. All of the same components were then transferred over to the Corsair case in the same positioning. The CPU still idled at 32 C, but the GPU was down to 23 C. Under load, we observed the CPU move between 52-66 degrees on average with a maximum temperature of 75 C. The GPU performed much better as well, shifting to a stable 40-41 C. Despite adding a bunch of noise (46.8 dB total system noise) the side intake did help reduce the CPU temperature by 2 degrees Celsius and the GPU temperature by about 4 degrees C.