Aquila is a straight forward BD printer based on open source technology. It allows for flexible upgrades and various modifications. Meanwhile, you are able to choose your favorite software as VoxelMaker, Cura and more. There’s also the possibility of adding an extra 3510 radial fan and print this mount to have dual fan cooling for your printer. Direct drive conversion Large Build Volume: Print bigger and more ambitious projects with the spacious 220 220250mm build volume. Voxelab offers a Creality style hotend with its printer, where the PTFE tube enters the nozzle. The hotend is one of the cheaper models on the market, which is to be expected with a 3D printer at this price point.

The printer’s surface is held in place with two metal clips, which lets you remove the glass if you need to. This is a handy feature for cleaning up after print jobs. One item to note is that the Aquila does not have insulation material beneath the printing bed. Power supply The X and Y-axes both feature a tensioning knob located at the end of their respective extrusions. These knobs add or subtract tension from the X and Y belts, which is critical for making prints without ringing or muting detail on sharp corners. One of the coolest features about the Aquila printer is that you’ll get a nice, color TFT screen with the unit. The screen has a white user interface with red accents. Unfortunately, it’s not a touchscreen, so you’ll have to use the hardware buttons to navigate through the menu. The screen is responsive and fast, which is nice to see since the printer doesn’t offer many advanced options or additional features. PTFE hotend The heat bed takes a little longer to warm up. You’ll reach 60 degrees Celsius in just under three minutes, however, it takes right at nine minutes for the unit to get to the 100 degrees Celsius mark. Power Consumption If the Voxelab Aquila 3D printer doesn’t sound like it’s going to meet your needs, there are plenty of options available on the market. Here are a few alternatives you might consider: Creality Ender 3

This Creality Ender 3 clone is really loud, without much to shout about.

This printer is a staggeringly good value, professionally made quality product that has more functionality than the much vaunted Ender 3 v2. The Creality 3D printer line is completely open-source, allowing for add-ons and upgrades of almost every component on the machine. This 3D printer gives you an awesome foundation for experimentation.

Also OctoPi? Only at staggering cost. A Raspberry Pi capable of running OctoPi is now just stupid expensive. It’s much cheaper and simpler to just buy a cheap secondhand Linux desktop computer and run Pronterface on it. The TEVO Tarantula is the 1ST DIY kit 3D printer from the Chinese manufacturer TEVO. It has a construction volume of 200x 200x 200 mm and can be used with a variety of different filaments ranging from PLA, TPU, PETG, ABS, and many more. The Aquila C2 boasts a large build volume of 220* 220*250mm, allowing you to bring your creative ideas to life on a larger scale. With its replaceable build plate, you can easily remove completed prints and start on your next masterpiece without any hassle.

You could do the same thing using a few screw nuts and a bit of patience, but the silicone bed mounts are quite cheap and will allow you to have your bed fixed much faster. This upgrade is something I started recommending to most of the printers available because it makes bed leveling much easier and should eliminate the need for any auto bed leveling solution like a BLTouch. One of the standout features of the Aquila C2 is its power failure recovery capability. Say goodbye to wasted time and filament due to unexpected power outages. This printer intelligently resumes printing from where it left off, ensuring that your progress is not lost. You can now save time and energy, focusing on your creative process.