Be sure that you are using a 2.4 GHz Wi-Fi network when connecting the smart bulb to Wi-Fi. Also, ensure that your home network is on a detectable status. There you have it, we hope one of the troubleshooting tips above helps you in fixing the problem. Try out all the guidelines above to see which one works for you. Make sure your phone and your bulb are connected to the same 2.4GHz Wi-Fi network. Also, ensure that the network signal is strong and stable. Yes, these can be controlled through the Alexa feature on a “Blast” speaker or any other device that has Alexa built-in. You do not need an echo specifically to control these lights. However, you need to enable the Smart Life skill on your Alexa app and link it with your Smart Life account. Then, you can use voice commands to control your lights, such as “Alexa, turn on the living room light” or “Alexa, set the bedroom light to blue”. Why Is My Smart Light Bulb Not Working? So, try these troubleshooting tips if you are having a hard time getting your Aisirer Smart Bulb Won’t Connect to Wi-Fi: 1. Ensure the Bulb is in Pairing Mode

2700K B22 Smart Bulb 1 Pack - AISIRER

If you are facing any issues with your Aisirer smart bulb not responding to your commands, it could be due to the following reasons: Usually, this removes all bugs, settings, and other problems you might not have noticed. To reset your Aisirer smart bulb; For recent Lifx bulbs, the process is identical: simply turn your smart bulb on and off five times until it flashes to inform you that it’s complete. Verify that your router is compatible with your bulb. Your router should support 802.11b/g/n protocols and have a WPA/WPA2 encryption mode. Dimmable Brightness Light & Energy Saving】Our smart light bulb uses LED technology to give you 7W of power, the equivalent to 60W traditional incandescent bulbs. Brightness can be adjusted from 1% up to 100%, saving up to 80% in energy and lasting up to 30,000 hours.The bulb should then be ready to add automatically once again via the app. But if it’s having trouble finding it, make a note of the serial number printed on the bulb and enter it manually by going to “Light setup” then “Add light” and finally “Add serial number”. Millions of Colors】Express yourself and make your space more colorful with AISIRER Smart Light Bulbs. Choose from 16 million colors and soft white to instantly change the look and atmosphere of your room. Control with your smartphone remotely or voice commands and create customized scenes and really unleash your creativity. Perfect light for parties, reading, and all-around leisure activities.

Bulbs WiFi Smart Bulb Bayonet, AISIRER 10W 900LM Alexa Light Bulbs WiFi Smart Bulb Bayonet, AISIRER 10W 900LM

The official instructions for resetting a Belkin WeMo smart bulb are a bit more detailed, but ultimately boil down to the same steps. Belkin suggests that you turn on the bulb, then switch it off for a second, before turning it on for 3-4 seconds, repeating the process three times. If the connection works properly but your device can’t find the network, you may need to upgrade your router or add an extender to increase its range and connectivity. If your router is overloaded or has too many devices connected to it, try reducing the number of devices connected to your router. Alternatively, use a different channel or frequency band for your bulb. The bulb may not be connected to the Wi-Fi network. Make sure that both your bulb and smartphone are connected to the same 2.4GHz Wi-Fi network with a strong and stable signal.Turn the bulb off and wait for a few seconds now, turn the bulb on and off three times in a row, and wait for the bulb to blink. Dimmable Bright Light & Energy Saving】The light brightness can be fixed percentages from 1% - 100% output, you can set many different scenarios like 'Reading Light' 'Soft Light' 'sleeping Light' etc. Our Smart light bulb using LED rather than incandescent bulbs. It is less energy, produces less heat, good for saving energy. The Smart Bulb must be ready to pair before it can successfully connect to Wi-Fi. So, before the Wi-Fi connection setup, ensure the bulb is ready to pair. If you have a Philips Hue Bridge, you can also perform a full factory reset on the hardware by flipping it over and pressing the clearly marked pin-hole button above the serial number. Just remember that this will cause your automated lighting hardware to forget every light on your system, and not just the bulb that’s acting up, so proceed with caution. During the initial setup, make sure that your smart bulb and router are very close and there is no object obstructing them. Also, ensure that your mobile device is close by too as this helps the bulb connect to Wi-Fi faster without interference.