The Archer is, however, very prompt at managing connections: when I “accidentally” disconnected the fixed broadband line, the MR600 automatically switched over to my Vodafone 4G SIM in ten seconds flat. It’s also less power-hungry than the Orbi, drawing around 7W while idle and peaking at 11W. The sim card slot accepts micro/nano sim.Included in the box along with an RJ45 Ethernet cable, A nano to micro converter & the router itself. MU-MIMO supported– ช่วยให้รับส่งข้อมูลหลายอุปกรณ์พร้อมกัน เพิ่มประสิทธิภาพและปริมาณการรับส่งข้อมูล WiFi ได้ดียิ่งขึ้น In wireless router mode, the LAN4/WAN port is used for connecting to a Cable/FTTH/VDSL/ADSL device. Do you know what frequency bands it connects with? You say it's super fast at times (what speeds?) but that could suggest it's aggregating the fast bands (band 3+1) - does it show 4G+ in the router UI? When it goes slow it may be dropping to band 20, which doesn't provide much throughput at all (it's more for coverage and deeper indoors)

Please note: The products of TP-Link partly contain software code developed by third parties, including software code subject to the GNU General Public Licence (“GPL“), Version 1/Version 2/Version 3 or GNU Lesser General Public License ("LGPL"). You may use the respective software condition to following the GPL licence terms. Indicates the signal strength the router received from the mobile internet. More lit bars indicate a better signal strength .

This has been extensively discussed and I have two Three 4G broadband lines in families homes. It’s often exactly as you describe. Please verify the hardware version of your device for the firmware version. Wrong ISP file upgrade may damage your device and void the warranty. （Normally V1.x=V1） Connect your computer’s Ethernet port to one of the LAN ports on Archer MR600 via an Ethernet cable. A firmware update can resolve issues that the previous firmware version may have and improve its current performance. To Upgrade The key feature the Archer boasts is its ability to use 4G carrier networks. This feature would be helpful to businesses operating away from fiber network infrastructure as internet connectivity can make or break a business.

IMPORTANT: To prevent upgrade failures, please read the following before proceeding with the upgrade process No internet connection when using TP-Link Wireless 4G LTE Router working as 3G/4G Router Mode(Case 1) 05-17-2023 408984How to troubleshoot if remote management does not work on LTE Gateway Router with 3G/4G Router mode 06-24-2022 28958 As I’ve noted, the Archer MR600 is far from a wireless powerhouse. The router uses Wi-Fi 5 instead of the faster Wi-Fi 6 technology and, with an advertised top speed of 867Mbits/sec, this isn’t even a particularly fast implementation. The two small aerials don’t bode well for coverage, either.

The Archer supports 802.11 ac/n/a on the 5 GHz band with speeds up to 867 Mbps.While 802.11 b/g/n 2.4 GHz with speeds up to 400 Mbps at 2.4 GHz.Up to 64 devices can be connected to the router thanks to the Qualcomm CPU inside. The next thing I would say would be to monitor your connected CellID over time - you can find this in your B535 router UI under [Advanced] > [System] > [Device Information] under CELL_ID. This is a unique number that identifies the cell and the mast that you are connected to at the time. It would be interesting to see if this changes when your speeds drop (which would mean you're connecting to a different cell/mast at that time). With various features and functions, the router is the perfect hub of your home or business network. Wi-Fi Router Mode– เพียงเชื่อมต่อเราเตอร์หลักผ่านสายเข้าไปยังพอร์ตLAN/WAN เพื่อใช้งาน 4G เป็นอินเทอร์เน็ตสำรอง ในกรณีที่อินเทอร์เน็ตจากผู้ให้บริการของคุณไม่สามารถใช้งานได้The system is starting up or firmware is being upgraded. Do not disconnect or power off the router. At the rear sit the four Gigabit Ethernet ports (if you’re only using 4G internet then you can use all of these for wired clients) and a SIM slot; this uses the 15mm micro-SIM format, but an adapter for nano-SIMs is thoughtfully included in the box so you can use whichever type you have to hand. The products of TP-Link partly contain software code developed by third parties, including software code subject to the GNU General Public Licence (“GPL“), Version 1/Version 2/Version 3 or GNU Lesser General Public License("LGPL"). You may use the respective software condition to following the GPL licence terms. The Archer MR600 requires no installation or configuration with software or apps, just plug in the power cable and insert your sim card to then start the router that automatically connects to the 4G network and distributes the signal via WiFi or the four LAN ports. No, incredibly hit and miss. There doesn’t seem to be any correlation in regards to how stable the WiFi is.

What external antenna do you have? Does it have a clear line of sight to the mast? If it's directional model is it aligned to point at your local mast? If there another mast in the area that it could be pointed at which may provide a more stable connection? Feature Filter: All Troubleshooting Q&A of functional explanation or specification parameters Configuration Guide When You Set Up FAQsWhat should I do if no APN profile or wrong APN profile is detected by TP-Link Wireless 4G LTE Router? 05-16-2023 40672 It's recommended that users stop all Internet applications on the computer, or simply disconnect Internet line from the device before the upgrade.