If you have to set the item on a surface to spray it you must make absolutely sure the surface is dust free all around. The air pressure from the spray will stir up any dust and spread it evenly on your otherwise perfect finish.

Spray Paints | Aerosol Paint | Screwfix Spray Paints | Aerosol Paint | Screwfix

Any time you are working with chemicals, it is essential to take the necessary safety precautions to ensure a hazard free working environment. This should include: Before you apply this coat on a metal, clean the metal surface with soap and water. Remove any residual coatings with alcohol. Once the metal is clean, apply a generous amount of ProtectaClear Coating. Give it between 24-48 hours to completely dry off. Rust Bullet Clear Shot Protective Coating can be applied over painted or unpainted metal or car hood surfaces. Paint your surfaces either by brushing, spraying, or rolling for a shiny look. Rust Bullet is self-leveling; hence, it will not leave a mark after drying.You can also use Dupli-Color General Purpose Acrylic Crystal Clear on trailer projects. After applying a regular paint on your trailer, use Dupli-Color as an extra protection measure. Trailer paint jobs usually fade fast. Apply Dupli-Color after your trailer paint job to make it last longer. This product is sensitive to gasoline. Therefore, it is recommended that you do not use it for gas tanks as the clear coat will get ruined immediately. The surface of metals can be effectively protected with a clear lacquer finish if applied correctly. Adherence to the application procedure listed below will ensure a successful result. Surrounding temperature and that of the item to be lacquered should be approximately 65 degrees. Although there is some leeway, temperatures below 50 or above 90 can cause problems. Moderate temperatures during the finishing and curing process are essential to a successful outcome. Clean the metal surface and remove any loose rust. Use a Cleaner Degreaser to remove grease. The Cleaner Degreaser should be water-based and non-flammable. Unlike other degreasing chemicals, Cleaner Degreaser doesn’t emit unpleasant or offensive odor. Use this Cleaner on painted surfaces as well.

Plastikote Quick Dry Clear Lacquer Spray Paint Gloss 400ml

One can of Dupli-Color General Purpose Acrylic Crystal Clear can be used on up to 12 to 14 sq ft (1.3 to 1.6 sq yd) of a metal surface. Apply two coats for maximum results. Apply in light layers so that the clear coat can dry faster. Standard dry time is usually 30 minutes, and you can handle the metal after one hour of the coating. This clear coat comes with a thirty-day replacement warranty if you find it defective within that period.EVERBRITE clear coating also seals rusted metals. Additionally, you can use this clear coat to protect your valued metals from oxidizing, UV rays, mildew, bleach, acid rain, chlorine, and saltwater. Compared to its competitors, Spraymax 2K gives more exceptional UV and weather protection. This clear coat offers a two-part Urethan Aerosol Clear Coat. This Aerosol clear coat features a new propellant technology in combination with an innovative nozzle design. Quart – Weights 2.5 lbs (1.1 kg). You can use this on to coat about 100 sq ft (11.1 sq yd) of a metal surface. Glamour Coat: Unlike the Turbo Coat, this clear coat dries slower, allowing for more leveling of the coating. Glamour Coats are usually less sensitive to moisture.