On top of that, many DIYers recommend applying pipe flux and heating the joint rather than using a crimping tool. That falls into the category of soldering your copper pipes, so there are various ways to do this. I have to admit opportunity cost is adding up in its favor. I hope I'm not creating and more problems for later albeit my experience with this cooper pipe system makes me wonder if the pipe can't last as long as the joining system whether fretting about the joining is as worth it as I thought. The main objective here is to get your copper pipes connected and secure. Crimping will use other copper crimps/connectors for your two or more pipes: which should be easy for any skill set. So on another note, we're now ondemand hot water which we installed during the pipe rerouting and replacement in the basement. There was an old gravity based hot water recirc with a half inch branch off the top of each hot manifold returning to the cold water feed to the water heater. It was only marginally effective anyway and a source, in my mind, of festering who knows what being stored with all the crap coming in from the city. In hindsight, whole house filtration would have been appropriate here but I'm only discovering all these issues 45 years down the line from this major replumb - and I must say that the folks who did it wouldn't have known that this house was a particular vector for every bit of crap in the system for some reason.

Here's another crimping tool compatible with copper pipes; it works with 1/2-inch and 3/4-inch copper rings in PEX pipe connections, is made with durable steel, is lightweight, has an easy-to-grip handle, and features a new ergonomic design.

How To Get Rid of Rodents (Rats & Mice)

If you’re working more on DIY projects at home, and wouldn’t necessarily need or have professional equipment, you may prefer using push-fit fittings instead. The right fittings for the job That of course includes the opportunity costs of the different systems in labor. I didn't actually get into press fittings until I had to renovated an eight apartment manifolded water When you hear the phrase "crimping copper pipes," you connect piping to other plumbing using copper or pressed connections. Think of the crimping process as joining various pipes together, forming one pathway for water to flow. This pipe crimping kit works well for copper materials, has a lightweight design, has comfort grips to minimize fatigue, and includes a 1-inch Crimper, 1/2&3/8&3/4-inch Jaws, Gauge, and Spanner.

Next, this copper crimping tool works wellwith hydraulic cylinders, gives your pipes a leak-free result, has a 360-degree turning head, is perfect for Tee fittings, doesn't require brazing/soldering, has an anti-slide grip, and is compatible with Viega Copper, Elkhart, Conex Pipe Fittings. Lastly, this high-power tool set has a 1/2" - 4" pressing capacity for copper, PEX, stainless steel, and carbon steel pipes, has crimp connect reporting technology, features forward and reverse triggers, is easy to use, is 20 volts, measures 7 x 18 x 25 inches, and weighs 23 pounds. Anyway, would a recirc pump generated enough flow on the closed system to trigger the hot water heater and any clever occupancy sensors (I'm even thinking a pushbutton to use a couple minutes before you want hot water). In addition, soldering does take longer than crimping, which is often credited for its longer-lasting lifespan. So, you may have a more extended install period, but if your pipes stay watertight for decades, that may be worth it.

Additionally, some online crimpers chose to "give fittings that hang down or a longer run upwards a crimp and quarter turn" and then solder their pipes together. This crimping tool is made specifically for copper pipes, fits 1/2",3/4", and 1" piping, is made with aluminum alloy material, has a rotating head, and is compatible with Viega Copper, Pro-Press, Elkhart, Conex Pipe Fittings.

You want to make sure you use a crimping tool to connect your pipes, or you risk them bursting, leaking, etc. Plumbing can be incredibly tedious, so keep this in mind during your project. Connecting your pipes by crimping them is the best/only way to ensure they're watertight. Furthermore, with a powered crimping tool, you can get this process done usingspecial copper fittings attached to copper tubing.Here are the top 12 copper-friendly crimping tools you can use for your next project: 1. IWISS Pex Pipe Crimping Tool Kit One forum user recommends you "anneal the tube first, clean and tin the inside, clean off the flux residue, then fill and proceed as described" to crimp a 1/4 inch copper pipe. Another copper crimping tool we have issuitable for copper pipes, copper fittings & joints, and copper sleeves, is made with aluminum alloy, has a 360-degree rotating head, creates leak-free connections, works for 1/2, 3/4 and 1” pipes/fittings, and has an ergonomic handle. I had been wrapping rubber roofing with hose clamps on the pipes where i could get to them but some of this ran through finished ceilings and i was starting to see spots there. I changed the piping routes and had the whole thing fixed in about 3 hours with the press tool. I was convinced.