Also, try to place the Access Point in the room where the wifi is used the most and at least 3 feet away from other appliances that send wireless signals at the same frequency (cordless phones and microwaves for example). Dual Radio Access Points have a refined industrial design and can be easily installed using the included mounting hardware.

If you are really looking for an UniFi outdoor ap then the UniFi Mesh and Mesh Pro are really the best options. If your house has multiple floors, or when you can only place one access point, then the U6-LR is a really good choice to mount on the ground floor (and use the lite models for the other levels).I would take both a computer and AP and plug directly into the switch with a short patch cable into the same port one after the other. Everything is using latest typical release channel firmware (not the pre-release), but even with pre-lease channel firmware.

It drives me nuts that I have spent quite some money on this, and still my network shows horrible performance. Stronger access points won’t matter much here, because keep in mind that the clients also need to send talk through the brick wall to the access point. I use a number of devices with Tasmota fw over IP (which i do trust) but also some IP devices with proprietary fw.Outdated firmware – If the firmware on the access point is too old, it won’t connect to the controller. Personally, I always use an LR on the ground floor (so it extends also a bit into the garden) and a lite on the first floor. PoE from a Ubiquiti UniFi switch or another 3rd party enterprise switch, or using the included PoE injector.